New OpenPeak firmware update (30th April 2012)
Re: New OpenPeak firmware update (30th April 2012)
Great news BuZz!
Very nice comments from O2!
Great international forum!
Very nice comments from O2!
Great international forum!
- Pete
O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens
Auto mater
O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens
Auto mater
-
- Posts: 2
- Joined: Tue May 01, 2012 5:51 am
Re: New OpenPeak firmware update (30th April 2012)
Can anyone who has performed the update confirm that the DLNA client is still available ("connect and play")?
Re: New OpenPeak firmware update (30th April 2012)
slatermethuen wrote:Can anyone who has performed the update confirm that the DLNA client is still available ("connect and play")?
I can't find it

-
- Posts: 3
- Joined: Mon Apr 30, 2012 5:01 pm
Re: New OpenPeak firmware update (30th April 2012)
I updated my Joggler (great forum btw !!) and can confirm I have lost the two things I used it for - Radio & connect and play. This now means my Joggler, for me at least, is left fairly useless. I am now looking at loadingup Android onto the device, which I successfully did last night however I cannot get the market to work (101 error). I will be having another go today, but in the mean time does anyone know of any useful apps that will give me internet radio and DLNA access to my NAS drive?
Cheers in advance.
Cheers in advance.
Re: New OpenPeak firmware update (30th April 2012)
check the apps pack folder on the sd card and you'll find Resco Radio which works OK. Most of the dlna clients in Market work. More info in the Android thread.
For streaming music your best bet is to install Logitech Media Server on the PC hosting your music & use Squeeze Play on the Joggler's native OS. You can also install Tunein Radio as a Squeeze Play app which works well.
For streaming music your best bet is to install Logitech Media Server on the PC hosting your music & use Squeeze Play on the Joggler's native OS. You can also install Tunein Radio as a Squeeze Play app which works well.
-
- Posts: 3
- Joined: Mon Apr 30, 2012 5:01 pm
Re: New OpenPeak firmware update (30th April 2012)
Hiya, thanks for the info. I installed Jazmod01 android last night and I didnt see any apps on the sd? Is there a version you would recommend? Also, I dont stream from my pc, I stream from my Bufallo Linkstation NAS drive which doesnt have any Squeeze player software installed. Am I able to install it? Sorry for all the questions, but this has literally fallen onto me since the update - as I am sure has happened to many other 'Joggling folk'
Re: New OpenPeak firmware update (30th April 2012)
Hi Sherlock71
I had this issue - looked connected but got an error when trying to use anything that needed an internet connection - but after a reboot and re entering the wireless details i got back online.
I had this issue - looked connected but got an error when trying to use anything that needed an internet connection - but after a reboot and re entering the wireless details i got back online.
Re: New OpenPeak firmware update (30th April 2012)
I have the stock image, and my joggler did not update on the 30th. Reading the comments I think best left alone as all my favorate apps are still working, SKY, Pure, traffic etc.
Re: New OpenPeak firmware update (30th April 2012)
The Android thread is at http://www.jogglerwiki.com/forum/viewto ... ?f=2&t=318 - it's only 2.2 but is working & stable. I don't think that ICS is stable enough yet for daily use. You're lucky that your NAS is a Buffalo Linkstation as there is modded firmware available for it that includes Squeezebox Server http://forum.buffalo.nas-central.org/vi ... 68&t=23603Denver'sJoggler wrote:Hiya, thanks for the info. I installed Jazmod01 android last night and I didnt see any apps on the sd? Is there a version you would recommend? Also, I dont stream from my pc, I stream from my Bufallo Linkstation NAS drive which doesnt have any Squeeze player software installed. Am I able to install it? Sorry for all the questions, but this has literally fallen onto me since the update - as I am sure has happened to many other 'Joggling folk'
Re: New OpenPeak firmware update (30th April 2012)
So, for those that have updated... what do you think?
BirdsLikeWires - Get fresh builds of Debian Bullseye, Bookworm, and Trixie for OpenFrame with the latest 5.10, 6.1, and 6.12 kernels! 

Re: New OpenPeak firmware update (30th April 2012)
1 Updated/auto upgraded from PNPII to New (plus a few items like Squeezebox still there)
1 not autoupgraded
So far.. observations:
1) The calendar doesnt work!
2) Interface seems slightly quicker
3) TOO MANY GAMES
4) News function is US based - BOO!
5) Weather App seems to work - and allows UK as well as worldwide locations - like this one
Not played much -
1 not autoupgraded
So far.. observations:
1) The calendar doesnt work!
2) Interface seems slightly quicker
3) TOO MANY GAMES
4) News function is US based - BOO!
5) Weather App seems to work - and allows UK as well as worldwide locations - like this one
Not played much -
Re: New OpenPeak firmware update (30th April 2012)
Mine insists it's not connected to the internet, despite being connected to the internet. This means the calendar just says 'Please check the network connection'. It also just updated (yes, the updated version just updated, but with no apparent changes). It downloaded a file called '6_O2_Final_Transition.tgz', but I couldn't copy it in time to see what it contained.
BirdsLikeWires - Get fresh builds of Debian Bullseye, Bookworm, and Trixie for OpenFrame with the latest 5.10, 6.1, and 6.12 kernels! 

- offbeatdave
- Posts: 1047
- Joined: Wed Mar 09, 2011 10:43 pm
Re: New OpenPeak firmware update (30th April 2012)
As it stands at the moment it seems pretty useless to be honest. I know I'm maybe not comparing the original O2 version with this one but even so, you wouldn't buy one on the strength of this default setup.roobarb! wrote:So, for those that have updated... what do you think?
It'll be OK once I can get into it via WinSCP and play around. Anyone sussed this yet as I'm too busy fixing issues with a 1.8TDCi engine this week to do it myself!

"EVERY DAY I'M JOGGLERING!"
Jogglering since Dec '09;
Tinkering with Jogglers since Feb '10 thanks to PMJ, Jogtools, PnP & sqpOS;
Gave something back Feb '12 to Apr '14 with PnP Mk II & PnP III;
Finally 'completed' PnP III Apr '15!
Jogglering since Dec '09;
Tinkering with Jogglers since Feb '10 thanks to PMJ, Jogtools, PnP & sqpOS;
Gave something back Feb '12 to Apr '14 with PnP Mk II & PnP III;
Finally 'completed' PnP III Apr '15!
- offbeatdave
- Posts: 1047
- Joined: Wed Mar 09, 2011 10:43 pm
Re: New OpenPeak firmware update (30th April 2012)
Ah-ha! Addressed at http://www.jogglerwiki.com/forum/viewto ... =542#p9156. Ta.offbeatdave wrote: It'll be OK once I can get into it via WinSCP and play around. Anyone sussed this yet as I'm too busy fixing issues with a 1.8TDCi engine this week to do it myself!
"EVERY DAY I'M JOGGLERING!"
Jogglering since Dec '09;
Tinkering with Jogglers since Feb '10 thanks to PMJ, Jogtools, PnP & sqpOS;
Gave something back Feb '12 to Apr '14 with PnP Mk II & PnP III;
Finally 'completed' PnP III Apr '15!
Jogglering since Dec '09;
Tinkering with Jogglers since Feb '10 thanks to PMJ, Jogtools, PnP & sqpOS;
Gave something back Feb '12 to Apr '14 with PnP Mk II & PnP III;
Finally 'completed' PnP III Apr '15!
Re: New OpenPeak firmware update (30th April 2012)
Hi Tofolo,Tofolo wrote:Hi Sherlock71
I had this issue - looked connected but got an error when trying to use anything that needed an internet connection - but after a reboot and re entering the wireless details i got back online.
Didn't work for me...have tried re-flashing it a couple of times to no avail.
Reverting back to the stock O2 image using the recovery tool elsewhere in this forum...the unit works fine.
Has me baffled

-
- Posts: 3
- Joined: Mon Apr 30, 2012 5:01 pm
Re: New OpenPeak firmware update (30th April 2012)
Hiya againdwl99 wrote:The Android thread is at http://www.jogglerwiki.com/forum/viewto ... ?f=2&t=318 - it's only 2.2 but is working & stable. I don't think that ICS is stable enough yet for daily use. You're lucky that your NAS is a Buffalo Linkstation as there is modded firmware available for it that includes Squeezebox Server http://forum.buffalo.nas-central.org/vi ... 68&t=23603Denver'sJoggler wrote:Hiya, thanks for the info. I installed Jazmod01 android last night and I didnt see any apps on the sd? Is there a version you would recommend? Also, I dont stream from my pc, I stream from my Bufallo Linkstation NAS drive which doesnt have any Squeeze player software installed. Am I able to install it? Sorry for all the questions, but this has literally fallen onto me since the update - as I am sure has happened to many other 'Joggling folk'
Thanks so much for the information, I now have Android 2.2 up and running complete with Resco radio and Bubble Upnp for streaming from my NAS drive. It all works perfectly !! It booted so fast too !!
Thank you to all the contributors on this forum, without this, the Joggler, I am sure would be dead and buried by now.
Re: New OpenPeak firmware update (30th April 2012)
You're right...it is connecting to the net. Have been able to telnet inroobarb! wrote:Mine insists it's not connected to the internet, despite being connected to the internet. This means the calendar just says 'Please check the network connection'. It also just updated (yes, the updated version just updated, but with no apparent changes). It downloaded a file called '6_O2_Final_Transition.tgz', but I couldn't copy it in time to see what it contained.

I think it was the 6_O2_Final_Transition.tgz file that the update downloaded as it was working until it rebooted after downloading that file. Hasn't downloaded that file again after I reverted back to the final O2 image...and then reflashed the new OpenPeak image (just to make sure I hadn't done something wrong)
Does feel a lot better than the O2 branded image...and is a lot faster. Just hope the bugs can be worked out to get it up and running fully again.
Re: New OpenPeak firmware update (30th April 2012)
Hey all,
Does the native UI have to be running in order for the update to happen? I run the native OS, but dont start the UI component - I just auto-launch SqueezePlay.
Is there anything about this update that would make me want to do the upgrade? (ie. something non UI related).
cheers
Fraser
Does the native UI have to be running in order for the update to happen? I run the native OS, but dont start the UI component - I just auto-launch SqueezePlay.
Is there anything about this update that would make me want to do the upgrade? (ie. something non UI related).
cheers
Fraser
Re: New OpenPeak firmware update (30th April 2012)
I couldn't sleep so have had a play with one of my two as they don't seem to have updated.
Flashed the usb & it now downloads 8_O2_Final_Transition.tgz and it appears the internet is working, Google Calendar & YouTube both connect.
So looks like they fixed whatever problem was in 6_02_Final.
I'll stick a copy of 8_O2 online once I get it off the Joggler.
Flashed the usb & it now downloads 8_O2_Final_Transition.tgz and it appears the internet is working, Google Calendar & YouTube both connect.
So looks like they fixed whatever problem was in 6_02_Final.
I'll stick a copy of 8_O2 online once I get it off the Joggler.
Re: New OpenPeak firmware update (30th April 2012)
You couldn't do astiggle wrote:Flashed the usb & it now downloads 8_O2_Final_Transition.tgz and it appears the internet is working, Google Calendar & YouTube both connect. So looks like they fixed whatever problem was in 6_02_Final.
Code: Select all
cat /etc/.usb-key

BirdsLikeWires - Get fresh builds of Debian Bullseye, Bookworm, and Trixie for OpenFrame with the latest 5.10, 6.1, and 6.12 kernels! 
