loading version os v3.03

[graham2008]

Hi

i have tried loading using the reflash and also the link provided but when i load on to joggler using internal memory 1 as my speakers are at the rear of the unit.
copy using the WIN32 disk image software but it loads and then the squeezeplayer keeps flashing and does not stop.
i then reboot the unit all ok connects to internet but does not connect when the squeezeplayer is reactivated.

The logitech is in a blue back ground and squeezeplay

asks for language select english language but does not connect to mysqueezebox.com

version 30291
firmware 8964

what am i doing wrong.

graham

[Man in a van]

Hi

i have tried loading using the reflash and also the link provided but when i load on to joggler using internal memory 1 as my speakers are at the rear of the unit.
copy using the WIN32 disk image software but it loads and then the squeezeplayer keeps flashing and does not stop.
i then reboot the unit all ok connects to internet but does not connect when the squeezeplayer is reactivated.

The logitech is in a blue back ground and squeezeplay

asks for language select english language but does not connect to mysqueezebox.com

version 30291
firmware 8964

what am i doing wrong.

graham

Graham try this ( no guarantee that it works)

Search online and download the HP USB Format Tool.

Use this to format the usb stick.

Install this on the Joggler, use Ethernet connection if you can.

http://www.jogglerwiki.com/forum/viewto ... ?f=2&t=784.

Check that it works OK (connects to the Internet).

Remove the files on the USB stick from reflash folder and replace with the SqueezePlay ones (again, check that they are there).

Then reflash the Joggler with the Internal OS.

If it does not work, try again and if that does not work, repeat with a different USB stick.

It can sometimes take several attempts.

Come back and let us know what happens, oh, and Welcome!!

atb

Ronnie.