O2 Joggler Forum

Not sure as I have not used the Joggler with original updated flash image in a while.

Thank you @offbeatdave Thinking I should leave mine alone for time being until I test the podcast? Logitech Media Server Version: 8.3.1 - 1676361197 @ Fri 17 Feb 2023 06:37:09 AM CET Hostname: ICS-MythTV-00 Server IP Address: 192.168.244.175 Server HTTP Port Number: 9000 Operating system: Debian - E...

You could may be 3 d print the metal stand and glue it to the back of the O2 Joggler.

OK so installed current release of Bullseye for OpenFrame and using script file to install Squeezeplayer and x windows on a USB stick. I also installed it using the line by line method and it is doing same thing. bul-ext2-1028-43-bullseye-5.10.189op.img.gz dated August 9, 2023 On reboot it appears t...

Thank you Andy!!

Yes here using an SDR radio for NOAA satellite imagery....built this 4 years ago. Everything including antenna is mounted in the attic. Using an RPi for this. See here. Most difficult part was building the antenna...then switched to a simple antenna and that worked even better... https://forums.home...

With a working Openpeak 2 with 2Gb eMMC you could install the image (shrinking it a bit) to one of these. I started here with a 32Gb stick then downsized it to the smallest Gb stick I had around which was 4Gb.

New endeavor here.... Using current posted Debian image and installation of Hamclock software Doing this on my Ubuntu Linux laptop. Don't use Windows 11 much these days but I do have it dual booting on all of my laptops. https://wiki.oarc.uk/hamclock_joggler I've done this before and it worked fine....

2022 Merry Christmas and a Happy New Year 2023 fellow Joggler forum users and family.

From across the pond ....Chicago...

Pete

Very nice.

Merry Christmas and Happy Holidays to you and yours Ronnie.

Just noticed an update to build: bul-ext2-1028-43-bullseye-5.10.159op.img.gz 15-Dec-2022 04:54 186M bul-ext2-1028-43-bullseye-5.10.159op.img.gz.md5 15-Dec-2022 04:56 78 Trying that one today on the Openframe 2 box. 1 - copying two above mentioned files to old USB boot stick - rfl-boot/reflash root@I...

Great news Ronnie!!

Yes I have to do that with current build on the OpenFrame2. It should hopefully work...none the less it only takes about 20 minutes to build it from scratch now....

Here is the manual way via command line: 1 - boot up with new partition 2 - ssh to Openframe 3 - sudo nano /etc/fstab 4 - make it look like this: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used...

Same here when I have used the script. GParted will not fit with the 1Gb partition. So create an old Ubuntu 14 boot stick and use GParted to extend the partition. You have to boot from a USB hub when you do this so that you can utilize a wireless Keyboard. Not totally sure what JiveLite is. Can I ru...

Good news! of-expand does not work AT ALL Don't expand it to 2Gb as Squeezeplayer fits fine at 1Gb. OR Boot up with an Ubuntu stick with desktop and use GParted to expand the partition to 2Gb or do it the manual command line way. 1 - https://jwills.co.uk/category/o2-joggler/ 2 - https://www.golinuxc...

One other issue is that I cannot shut down or reboot via the Squeezeplay menu. I can though logging in via SSH and running the script.
The left top button shuts off the screen which works fine.

This time installed a lite desktop and and it all fit fine on the Openframe 2. Ideally a perfect hard mod add would be to use an internally mounted SD card or USB stick leaving the external USB port free. Even soldering a PATA port to the traces on the motherboard would be a tight fit for an SSD car...

Redoing it again. This time resizing it right away. Then configuring an xrdp desktop that I can remote to and seeing if this all fits on the 2Gb partition. BTW you should replace the old WLAN / Bluetooth card with an "el cheapo" Intel combo bluetooth card. They are around $10 these days. T...

What "image not recognized"? You are copying both the compressed gz file and md5 file over to your reflash boot stick eh? I did initially only copy the compressed image over and it did not install. Your USB stick may be corrupt. https://birdslikewires.net/download/openframe/images/debian/l...

OK installed latest version of Bullseye on the Openframe 2. bul-ext2-1028-43-bullseye-5.10.158op Went well. Some steps that I did. 1 - enabled the new Intel WiFi combo bluetooth card. Works well. sudo apt install firmware-iwlwifi sudo modprobe -r iwlwifi sudo modprobe iwlwifi sudo dmesg 2 - configur...