O2 Joggler Forum

I have one Joggler running 5.10.179 connected on Ethernet and (for reliability) trying to connect a second one on Ethernet too. However, the second one appears to get the same IP address from DHCP. I seem to recall an issue with non unique MAC addresses a long time ago - can anybody advise? Looking...

My journey to 5.10 really isn't going well

My latest issue is that when I try and use my USB DAC/Amp with 5.10.179 it crashes the Squeeeplayer app. Any suggestions as to what I can check - I think the unit is still alive and can probably look at logs, etc?

I have one Joggler running 5.10.179 connected on Ethernet and (for reliability) trying to connect a second one on Ethernet too. However, the second one appears to get the same IP address from DHCP. I seem to recall an issue with non unique MAC addresses a long time ago - can anybody advise? Looking...

I had an old favourite for BBC R4 which didn't work so assumed those streams were dead now. I added a BBC Sounds version as a favourite. What system are you running LMS on? It has to transcode the BBC streams because they aren't supported by the Joggler and it uses LAME to do that. See this link to ...

You will need to delete those favourites as they will no longer work. In the UK, BBC radio streams are now only available via the new BBC platform. You can add them again from BBC Sounds when you get it working in LMS. What version of LMS are you using and on what platform? There is quite a good WIK...

I have one Joggler running 5.10.179 connected on Ethernet and (for reliability) trying to connect a second one on Ethernet too. However, the second one appears to get the same IP address from DHCP. I seem to recall an issue with non unique MAC addresses a long time ago - can anybody advise? Looking ...

I am trying to install an "out-of-kernel" driver for the Realtek 8811CU so I can use a better, low cost USB WIFI. The instructions to install the drivers are at https://github.com/morrownr/8821cu-20210916 but I am a Linux numpty and have struggled at the first step and am hoping someone c...

I am trying to install an "out-of-kernel" driver for the Realtek 8811CU so I can use a better, low cost USB WIFI. The instructions to install the drivers are at https://github.com/morrownr/8821cu-20210916 but I am a Linux numpty and have struggled at the first step and am hoping someone ca...

Hi - I had this exact issue and the solution for me was to set the transcoding for the joggler (see this post: https://www.jogglerwiki.com/forum/viewtopic.php?p=33365#p33365 ). A couple of caveats though: I am not on the most recent Joggler build (one from the end of last year) so can't vouch for t...

I am rebuilding a Joggler and used 5.10.176 from 23 March 2023 and that booted fine. However, audio is bad (stutters) with the BBC Sounds plug-in, but works fine for Global, Spotify, my ripped music, etc. BBC Sounds also works fine on the SB Radio, so issue is specific to the Joggler. Anyone got any...

I am setting up another Joggler and downloaded the 4 Aug 2022 build 135 and it didn't boot. I noticed that it is a LOT smaller than previous ones so perhaps the build failed? I downloaded the 30 July 2022 build 134 and that one booted fine.

I think the OS updates broke my previous attempts with 3.16 so have tried again...

I built a new USB stick with 3.16 and installed Squeezeplay but no updates. I had it connected on Ethernet and it worked for an hour or so and then Squeezeplay crashed to the CLI. Testing again now...

I decided (at last!) to upgrade a few of my Jogglers to this and am having major issues running it on internal storage with any of them - crashes, disk errors, etc. Is it likely that *all* have failed or could it be something else? It works fine from USB, but not as convenient. Also, is there any wa...

I have eventually got round to fitting a Netgear WNDA3200 to one of my Squeezeplay Jogglers. Opening it up and fitting went far easier than I expected so I should have done a long time ago :-) It works fine connecting to a 2.4Ghz WIFI (better than stock interface) but I can't connect to a 5Ghz one. ...

Hi.

Is this still for sale.

Regards

Paul

I am currently running a Joggler with the Squeezplay OS (internal flash) and very pleased with it. I would like to use another Joggler with Squeezeplay but need it to connect to some Bluetooth speakers. Is this possible using one of the Links distros? Sorry if this is covered somewhere in the forum...

I am currently running a Joggler with the Squeezplay OS (internal flash) and very pleased with it. I would like to use another Joggler with Squeezeplay but need it to connect to some Bluetooth speakers. Is this possible using one of the Links distros? Sorry if this is covered somewhere in the forum ...

Thanks Jamie.

Great, please PM me your papal email address

Cheers

Paul

Do you still have one available at £40 inc postage? Can send money via Paypal today...