O2 Joggler Forum

I have installed the new EDO and...my WaveIO works! Switching the digital output back to the internal device, SPDIF works as well. Thank you for the great job. I confirm that, with the previous EDO version, my WaveIO didn't work even with external power. Good news But you still have to unpug and th...

Same problems if on USB bus power or external power.
Actualy seems slicker regarding recognition if on Bus power

Whooopeee That last bit had an effect ls /etc/asound.conf joggler@joggler:~$ ls /etc/asound.conf ls: cannot access /etc/asound.conf: No such file or directory acond.conf is never listed cd ~ joggler@joggler:~$ wget http://www.jogglerwiki.com/forum/download/file.php?id=392 -O EnhancedDigitalOutput.ta...

Sorry we had a post overlap.
I did just go back and nano the /boot/grub.cfg and pasted its content to the previous post.
Not sure were I got the copy from for my paste, far too much right clicking for me to keep sane

Welcome to confused dot com, I enjoy it here :oops: Still not working. The whole file content of /boot/grub.cfg is set timeout=0 menuentry "SqueezePlay OS v1.09" { linux /vmlinuz-3.2.36jog2 root=/dev/mmcblk0p2 loglevel=3 ro quiet usbcore.autosuspend=-1 usbcore.old-scheme-first=1 initrd /in...

Thanks I have appended /boot/grub.cfg with set timeout=0 menuentry "SqueezePlay OS v1.09" { linux /vmlinuz-3.2.36jog2 root=/dev/mmcblk0p2 loglevel=3 ro quiet usbcore.auto$ initrd /initrd.img-3.2.36jog2 } sudo apt-get install pyusb still returns Reading package lists... Done Building depend...

Thanks to Wilberforce for spotting the error and thanks to themystical for finding a good link. But how do I append the kernal? Error message "device descriptor read / 64, error -71" while booting is caused by USB device that is not recognized correctly and will not work until reconnected....

It may not be getting powered on at boot.

On power on or reboot WaveIO does not appear in the choices menu in
Joggler Gui Settings>Audio Settings>Digital Out
I only see the Jogglers own internal DAC

WaveIO only apears when unplugged / replugged once Squeezeplay is running.

All went well untill sudo apt-get install pyusb Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package pyusb dmesg output is large and maybe Terminal did not get the first of its output The last entries mmc2: Too large timeout requested for ...

Tony I wondered whether there should be a hyphen in sudo python /home/joggler/reset_usb.py 20a0 4143 i.e sudo python /home/joggler/reset_usb.py 20a0:4143 to match the ID in the lsusb output? (even though Wilberforce's example doesn't) Hopefully Wilberforce will be along shortly.... Makes no differe...

Sorry been at work what is the output of : ls /proc/asound when its working/not working? If you can run the reset_usb.py script when you would normally unplug, that will give a good indictation of whether or not it will help pre start up. WaveIO running Joggler Gui Settings>Audio Settings>Digital Ou...

Sorry I am new to Linux and not so fast or slick I did sudo nano /opt/squeezeplay/bin/squeezeplay.sh I made a mistake and did not copy the very bottom of the file in the previous post My current modified file is here #!/bin/sh # squeezeplay.sh v1.12 (18th July 2012) by Andy Davison # This is the Squ...

The best bet is to check the squeezeplay logs (you have to manually redirect them to file - see http://www.jogglerwiki.com/forum/viewtopic.php?f=2&t=740&start=60) and compare the output of dmesg in these scenerios: - directly after boot without unplugging the device - after replugging the d...

My work around for Joggler with WaveIO 1 WaveIO disconected 2 Boot Joggler 3 Connect WaveIO 4 Select WaveIO using Joggler GUI Settings>Audio Settings>Digital Out 5 Joggler auto reboots 6 Joggler Gui Settings>Audio Settings>Digital Out shows "status Stopped" 7 If WaveIO is not present at th...

Yes I had a buzz with WaveIO, would not describe it as chirping though. I am using WaveIO I2S non isolated at the moment and the noise is on USB power ground, my temporary fix is to connect USB power ground to PE. Later on I will move to WaveIO isolated ground outputs and remove PE. I would not exp...

Yes I had a buzz with WaveIO, would not describe it as chirping though. I am using WaveIO I2S non isolated at the moment and the noise is on USB power ground, my temporary fix is to connect USB power ground to PE. Later on I will move to WaveIO isolated ground outputs and remove PE. I would not expe...

Hello all, First I would like to thank Wilberforce for taking the time to make this available for all of us. I am the thread OP from pfm refered to by themystical a few posts back. Still having "Dac not connected" on reboot or cold start with WaveIO USB-to-Spdif board. Relaunch is my curre...