Ubuntu Bionic for OpenFrame

General discussion relating to the O2 Joggler, from the default O2 setup, to alternative operating systems and applications.
User avatar
roobarb!
Posts: 1548
Joined: Sat Mar 05, 2011 1:30 pm
Location: Manchester, UK
Contact:

Re: Ubuntu Bionic for OpenFrame

Post by roobarb! » Tue Dec 17, 2019 10:08 am

sanjap wrote:
Fri Dec 13, 2019 6:00 am
Roobarb, is it possible to boot the joggler directly to kodi without the need to login screen and entering the command "kodi" . I saw some examples online but none seems to work with XORG. Will appreciate your help
Yeah, create a file called '.xinitrc' in the home directory of the user you wish to boot into automatically. Anything you enter in that file will be run, so potentially you just need the command 'kodi' in there. Then type:

Code: Select all

of-autologin <user>
Reboot.

Fingers crossed that should be the extent of it.
birdslikewires.net - home of the Reflash System, SqueezePlay (OS) and various tools for the Joggler!

castalla
Posts: 852
Joined: Wed May 29, 2013 10:33 am

Re: Ubuntu Bionic for OpenFrame

Post by castalla » Wed Dec 18, 2019 9:24 am

Okay - maybe I'm not understanding this!

1. Boots
2. Can I ssh login?
3. Is wifi enabled on first boot? Where can I set the boot wifi settings (eg. interfaces)?

User avatar
roobarb!
Posts: 1548
Joined: Sat Mar 05, 2011 1:30 pm
Location: Manchester, UK
Contact:

Re: Ubuntu Bionic for OpenFrame

Post by roobarb! » Wed Dec 18, 2019 3:08 pm

castalla wrote:
Wed Dec 18, 2019 9:24 am
1. Boots
Good!
castalla wrote:
Wed Dec 18, 2019 9:24 am
2. Can I ssh login?
Yes, by default with root user enabled. Password is 'joggler'.
castalla wrote:
Wed Dec 18, 2019 9:24 am
3. Is wifi enabled on first boot? Where can I set the boot wifi settings (eg. interfaces)?
It is, edit the file 'network.yaml' on the boot partition (the one you can see from Windows after you've written the image).

By default the content of network.yaml is:

Code: Select all

network:
  version: 2
  renderer: networkd
  ethernets:
    eth0:
      dhcp4: true
  wifis:
    wlan0:
      dhcp4: true
      access-points:
        YOURWIFINAME:
          password: YOURWIFIPASSWORD
          
You just need to change 'YOURWIFINAME' and 'YOURWIFIPASSWORD'. Just keep an eye on 'YOURWIFINAME' - it needs to end with the ':'.
birdslikewires.net - home of the Reflash System, SqueezePlay (OS) and various tools for the Joggler!

castalla
Posts: 852
Joined: Wed May 29, 2013 10:33 am

Re: Ubuntu Bionic for OpenFrame

Post by castalla » Thu Dec 19, 2019 6:53 am

Thanks!

Is there anyway to blank the joggler screen?

castalla
Posts: 852
Joined: Wed May 29, 2013 10:33 am

Re: Ubuntu Bionic for OpenFrame

Post by castalla » Thu Dec 19, 2019 5:58 pm

I had plans to use this as a headless server for LMS. LMS installs fine. BUT when I reboot LMS is unreachable (even 'tho top shows it as running). Trying to purge LMS gives a lot of error messages about locked and read only files.

A bit of a shame.

sanjap
Posts: 19
Joined: Sat Apr 18, 2015 5:15 am

Re: Ubuntu Bionic for OpenFrame

Post by sanjap » Wed Dec 25, 2019 6:04 pm

roobarb! wrote:
Thu Dec 05, 2019 1:05 pm
Don't panic folks, links will be down to images for a couple of hours while a new version compiles. I left HPET (High Precision Event Timer) support enabled, which isn't required on the OpenFrames and started to cause issues on the new kernel 5.4, so I decided to remove it from all kernels and let the system build fresh images.
This seem to have broken the backlight driver on the OF2. All new images boot to a very low dim level.

User avatar
roobarb!
Posts: 1548
Joined: Sat Mar 05, 2011 1:30 pm
Location: Manchester, UK
Contact:

Re: Ubuntu Bionic for OpenFrame

Post by roobarb! » Sun Dec 29, 2019 8:24 pm

sanjap wrote:
Wed Dec 25, 2019 6:04 pm
This seem to have broken the backlight driver on the OF2. All new images boot to a very low dim level.
I'll check it out when I'm next near an OF2.
birdslikewires.net - home of the Reflash System, SqueezePlay (OS) and various tools for the Joggler!

Post Reply