Page 4 of 19

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 5:49 pm
by BuZz
you are looking at a partition on the stick rather than full stick size, or you have a bad stick.

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 6:09 pm
by nitrowing
The other download extracted OK.
I used unetbootin to write to the USB but there was no difference to the OS when I booted up!!

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 6:21 pm
by jazzmista
nitrowing wrote:The other download extracted OK.
I used unetbootin to write to the USB but there was no difference to the OS when I booted up!!
Do you mean from Mijuu's build or did it boot to the stock OS? I use https://launchpad.net/win32-image-writer for writing images rather than unetbootin - had far more success with the former.

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 6:23 pm
by jazzmista
crisdo98 wrote:Great work on the image with market. One question though.. how on earth do I fit 3.73gb onto a stick that shows only 3.66gb?
Thanks! Try reformatting your stick, there may be some system files on there that are taking up space? Alternatively, wait for JazzMod v1.1, as that may be able to install over Mijuu's original build (replace system.img)

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK DOW

Posted: Wed Feb 01, 2012 6:24 pm
by jazzmista
tangye wrote:
jazzmista wrote:
tangye wrote:Hi. I managed to get this to install. On average it takes me 2-3 tries to get the image to initially boot off the USB stick. However if I have to reboot the joggler (by reboot I mean pull the power and reinsert), it seems much harder to get the image to boot again. Probably only rebooted successfully 2 times in about 20 attempts. I think this is a problem with my joggler though, nothing to do with the new image.

Anyway, I managed to add a Google account in the account settings, but under the account settings, there was nothing to sync it to (ie no options to sync Gmail, Contacts or Calendar). Then I remembered jazzmista's first post in this thread said to download Gmail from the Market, however I couldn't find Gmail in the Market. When I went to start the existing email application, I was asked to sign in with either a "Corporate" or "Email" account.

I then tried to go into the calendar app, and I was asked to either sign in with an existing account or create a new account. I signed in with the account I added in the account settings, but was told that the account had already been registered on the system.

So I guess what I'm asking here is:

1) Is there anywhere I can get a copy of the Gmail app, or should I just search the internet for it?

2) Am I doing something stupid regarding the calendar app, such that it doesn't recognise my account, or do I need to install something else to get the calendar to recognise my account?

Once again, many thanks for your help and all the hard work everyone has put into this version.
I've got the Gmail apk - I'll add that (and a few others) to the main post. They should hopefully be included in JazzMod v1.1 as system apps :-) The default email app doesn't work for Gmail - does anyone mind if I remove that to avoid confusion? Again, I'll provide the Email.apk for people to install in v1.1.

Edit: Added to the main post.
Jazzmista, I installed the Gmail app and it works, thanks for making the apk available. Is the Gmail apk an older version (ie pre ICS) version of the Gmail app? The reason I ask is because I managed to register my gmail account with the native ICS email client which looks very different to the version you provided.

As for using the "updated system.img file" approach for releasing updated to your image, that sounds perfect. Thanks again for your help.
Yes, it is from Gingerbread (where I got the market from). I'm currently testing a ICS version of Gmail and will edit the main post when I've made sure everything works :-)

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 6:26 pm
by jazzmista
BuZz wrote:image here: http://joggler.exotica.org.uk/img/android/jazzmod01.7z

note: the incoming folder is write only, so your link in the first post won't work. has to be this way, else the ftp would be used as a warez/porn drop site by people!

i've moved the image to the link above which you can use. should be able to feed people at up to 10MB/second.
Thanks BuZz! I'll update the main post again :-)

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 7:57 pm
by miccheck1516
I dont see any option to enable ethernet, am I missing it or is it just not there?

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 8:16 pm
by jeffers
miccheck1516 wrote:I dont see any option to enable ethernet, am I missing it or is it just not there?
Not currently suppported in ICS-x86 although the developers on the mailling list are discussing it - ive sent a message to Mijuu on mporter.

On another note - does anyone know how to change the timezone permenantly? Ive unticked 'automatic time zone' and manually set it to UK but it goes back to China after a reboot :(

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 8:29 pm
by nitrowing
jazzmista wrote:
nitrowing wrote:The other download extracted OK.
I used unetbootin to write to the USB but there was no difference to the OS when I booted up!!
Do you mean from Mijuu's build or did it boot to the stock OS? I use https://launchpad.net/win32-image-writer for writing images rather than unetbootin - had far more success with the former.
Sorry - Mijuu's release booted as normal from the USB.
I can't get win32-image-writer to run on my W7x64. I tried ImgBurn and the Windows Image writer too.

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 9:38 pm
by jazzmista
nitrowing wrote:
jazzmista wrote:
nitrowing wrote:The other download extracted OK.
I used unetbootin to write to the USB but there was no difference to the OS when I booted up!!
Do you mean from Mijuu's build or did it boot to the stock OS? I use https://launchpad.net/win32-image-writer for writing images rather than unetbootin - had far more success with the former.
Sorry - Mijuu's release booted as normal from the USB.
I can't get win32-image-writer to run on my W7x64. I tried ImgBurn and the Windows Image writer too.
That's strange! Try wiping your stick and reflashing - the telltale sign of JazzMod is the custom boot-animation (ICS For Joggler flashing text repeated)

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 9:53 pm
by delta3
Looking good so far. Thanks to Mijuu & jazzmista.
jeffers wrote:
miccheck1516 wrote:I dont see any option to enable ethernet, am I missing it or is it just not there?
Not currently suppported in ICS-x86 although the developers on the mailling list are discussing it - ive sent a message to Mijuu on mporter.
Unusable for me without ethernet. I hope they do add it.

How do you shut ICS down? Have looked and can't see anything!

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Wed Feb 01, 2012 9:55 pm
by danfoshizzle
Win32 disk imager can give problems using different versions, version 0.2 can be better than 0.3 sometimes depending on the individual image

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Thu Feb 02, 2012 12:14 am
by hawsey
nitrowing wrote:
jazzmista wrote:
nitrowing wrote:The other download extracted OK.
I used unetbootin to write to the USB but there was no difference to the OS when I booted up!!
Do you mean from Mijuu's build or did it boot to the stock OS? I use https://launchpad.net/win32-image-writer for writing images rather than unetbootin - had far more success with the former.
Sorry - Mijuu's release booted as normal from the USB.
I can't get win32-image-writer to run on my W7x64. I tried ImgBurn and the Windows Image writer too.
I use W7x64 as well and the only version that worked for me was win32 version 0.3 , all other utils failed and I tried a few :!: ,also fyi I use Hp utility to completely re format my sticks first they all work first time now :D
Good luck

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Thu Feb 02, 2012 2:14 am
by nitrowing
I used a live Linux Mint to do the job :D
ICS runs really well - very good job!

I'm tempted to run LauncherPro though, I need to resize the Clock widget...

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 10:50 am
by jazzmista
nitrowing wrote:I used a live Linux Mint to do the job :D
ICS runs really well - very good job!

I'm tempted to run LauncherPro though, I need to resize the Clock widget...
I use Zeam on my phone, but I don't think it works with the Joggler, which is a shame as it is the fastest launcher out there!Be careful that LauncherPro doesn't cause a few issues with SystemUI.apk - GOLauncher EX does on boot before it realises it is a tablet and switches orientation!

Update on ICS Gmail - it requires extra permissions, which on clicking the "Request Permissions" button causes System to force close - going to try pushing it to System and see if that helps. If it does, it will be included in JazzMod v1.1!

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 10:57 am
by jazzmista
Also, for those who want a reboot widget, I've discovered a bug feature that allows you to reboot from the lockscreen. Simply slide left for the camera (instead of right to unlock), and wait for the Joggler to have a tantrum (as it has no camera) and reboot! Instant reboot as well :-D

edit - 100th post! :geek:

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 7:38 pm
by asantaga
Hey JazzMista,

Been a while since I tinkered with my jogger, and this looks nice :-), gonna try it out today.

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 8:28 pm
by jp_hero
Nice work Jazzmista. I've got a few ideas of some tweaks we can add to this. I'll test them out and get in touch.

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 8:31 pm
by jp_hero
jazzmista wrote:Also, for those who want a reboot widget, I've discovered a bug feature that allows you to reboot from the lockscreen. Simply slide left for the camera (instead of right to unlock), and wait for the Joggler to have a tantrum (as it has no camera) and reboot! Instant reboot as well :-D

edit - 100th post! :geek:
have you tried gscript lite?

a custom script of

"reboot -p"

would make a normal device shutdown

and

"reboot"

would make a normal device reboot. Neither work because of the "odd" root method. We need to get the up to date su binaries installed in the right place. Have you tried old versions of superuser?

Re: Mijuu-based JazzMod ICS v1.0 (Working Market! - LINK UP)

Posted: Sun Feb 05, 2012 8:32 pm
by jp_hero
nitrowing wrote:I used a live Linux Mint to do the job :D
ICS runs really well - very good job!

I'm tempted to run LauncherPro though, I need to resize the Clock widget...
try trebuchet or nova they are ics specific launcher. Nova can resize. ADW ex is also ics compatible