Page 15 of 51
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Mon Feb 27, 2012 7:33 pm
by wywywywy
roobarb! wrote:wywywywy wrote:I've already changed the asound.conf to the simple version, but the sound still gets dropped after a few hours.
Any ideas please?
This is the latest version 1.31 on native.
Hmm. I'm sorry, but I've never seen that before - dropping out on the asound.conf with no additional mixer.
If you're on the native system, have considered trying SqueezePlay on one of the Ubuntu builds? Or are you using additional software on the O2 OS besides SqueezePlay?
I only use SqueezePlay on Joggler and nothing else. I was under the impression that Native is more stable and better supported. Is that not the case?
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Tue Feb 28, 2012 11:57 am
by roobarb!
wywywywy wrote:I only use SqueezePlay on Joggler and nothing else. I was under the impression that Native is more stable and better supported. Is that not the case?
I would say that running it on the native OS is actually more problematic, mainly because the O2 interface has a habit of restarting itself occasionally, which hides the SqueezePlay interface! I personally use Joli OS (because of the nice touchscreen-friendly icons) and it is rock solid.
That said, if you have nothing else on the Joggler and are using the basic asound.conf, I can't think of any reason you would have audio dropouts. That configuration really is as simple as it gets, so unless there's a hardware reason for it, it should be working perfectly. Other than that issue with the O2 interface I mentioned.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 02, 2012 11:29 am
by roobarb!
At last! I found time to make an update!
Would appreciate some testing on Ubuntu systems with this one; seems to work for me, but I've changed my build system (actually using an older compiler now, but it better matches the native OS). It may just be my imagination, but the performance of the UI seems to have improved.
If things go wrong for you, the previous installer is still available as sqp-131.sh.
We're now up to SqueezePlay v7.7.2-9626.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 03, 2012 10:09 am
by ARJunior
roobarb! wrote:At last! I found time to make an update!
Would appreciate some testing on Ubuntu systems with this one; seems to work for me, but I've changed my build system (actually using an older compiler now, but it better matches the native OS). It may just be my imagination, but the performance of the UI seems to have improved.
If things go wrong for you, the previous installer is still available as sqp-131.sh.
We're now up to SqueezePlay v7.7.2-9626.
Thank you Roobarb.
I'm going to test this update now as I have some problem since I use 7.7.1 version
Unfortunately I didn't make a backup of last build (7.6.2) so I can't restore it.
If needed, could you give us a link to return to previous build (7.6.2) ?
But first, I will run v7.7.2 for several days...
Regards.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 03, 2012 11:17 am
by johnnygal
roobarb! wrote:At last! I found time to make an update!
Would appreciate some testing on Ubuntu systems with this one; seems to work for me, but I've changed my build system (actually using an older compiler now, but it better matches the native OS). It may just be my imagination, but the performance of the UI seems to have improved.
If things go wrong for you, the previous installer is still available as sqp-131.sh.
We're now up to SqueezePlay v7.7.2-9626.
Cheers, I'll give it a go on Ubuntu (old 9.10 !) tomorrow when I get home.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 03, 2012 12:18 pm
by roobarb!
ARJunior wrote:If needed, could you give us a link to return to previous build (7.6.2) ?
Ah, I've still got v7.6.2
here - just download that tarball and you should be able to decompress it over the top of the v7.7.2 install if you really need to go back. What issue are you having with the newer version?
ARJunior wrote:But first, I will run v7.7.2 for several days...
Good stuff - let me know how it goes.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Mon Mar 05, 2012 10:49 pm
by wywywywy
roobarb! wrote:wywywywy wrote:I've already changed the asound.conf to the simple version, but the sound still gets dropped after a few hours.
Any ideas please?
This is the latest version 1.31 on native.
Hmm. I'm sorry, but I've never seen that before - dropping out on the asound.conf with no additional mixer.
If you're on the native system, have considered trying SqueezePlay on one of the Ubuntu builds? Or are you using additional software on the O2 OS besides SqueezePlay?
Sorry I am an idiot. I was changing the asound.conf in the Squeezeplay directory rather than /etc!
I made the change in /etc a few hours ago and so far it seems okay. Hope it stays that way
SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Mon Mar 05, 2012 11:43 pm
by roobarb!
wywywywy wrote:Sorry I am an idiot. I was changing the asound.conf in the Squeezeplay directory rather than /etc!
I made the change in /etc a few hours ago and so far it seems okay. Hope it stays that way
Hehe! Glad you got it sorted - I couldn't figure that one out!
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 1:55 pm
by johnnygal
johnnygal wrote:roobarb! wrote:At last! I found time to make an update!
Would appreciate some testing on Ubuntu systems with this one; seems to work for me, but I've changed my build system (actually using an older compiler now, but it better matches the native OS). It may just be my imagination, but the performance of the UI seems to have improved.
If things go wrong for you, the previous installer is still available as sqp-131.sh.
We're now up to SqueezePlay v7.7.2-9626.
Cheers, I'll give it a go on Ubuntu (old 9.10 !) tomorrow when I get home.
Hi there,
I have been using this latest build on Ubuntu 9.10 (UNR version). On the whole it's working well.
However, one issue I have is that after a while of uptime, usually when the player is "off", on resuming the playback the sound goes weird. The sound seems to keep repeating itself several times before moving on to the next part of the audio track and repeating that several times too. The length of each playback "piece" is less than a second, so you kind of get half a word being repeated several times. I initially put this down to running Ubuntu from a micro-SD card plugged in the side USB port. But I have just put the squeezeplay onto a native OS joggler and the same problem arose.
This occurs when streaming music/internet radio across the wireless network. None of my jogglers have hard-wired network connections. Restarting squeezplay sometimes sorts it out. Other times I have to restart the joggler.
I have recorded such an instance on my phone camera, so can send this to you if it's of any help.
Thanks,
John
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 2:46 pm
by roobarb!
johnnygal wrote:However, one issue I have is that after a while of uptime, usually when the player is "off", on resuming the playback the sound goes weird. The sound seems to keep repeating itself several times before moving on to the next part of the audio track and repeating that several times too. The length of each playback "piece" is less than a second, so you kind of get half a word being repeated several times.
Okay... does it do this every time? Also, the audio it plays back - is it 'current', or something from when you last used SqueezePlay? And is your wireless connection still running and stable?
There are a number of possibilities for this, but one that immediately springs to mind is the wireless - I've had issues with stuttering audio when the wireless attempts to get more data and then barfs for some reason. Using the vendor wireless driver cured it for me, but this was on BuZz's builds, not on UNR.
Alternatively, it could be something introduced with the latest build - we're always using the latest build of PortAudio and the like, so it's possible that is the cause. Did it never happen prior to v7.7.2?
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 6:26 pm
by ARJunior
@johnnygal
I have got the same issue with last build as I had forgotten to edit asound.conf after update.
Try to use simple asound.conf...it should fix your problem...
@Andy
Now, v7.7.2 works like a charm
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 9:13 pm
by johnnygal
roobarb! wrote:johnnygal wrote:However, one issue I have is that after a while of uptime, usually when the player is "off", on resuming the playback the sound goes weird. The sound seems to keep repeating itself several times before moving on to the next part of the audio track and repeating that several times too. The length of each playback "piece" is less than a second, so you kind of get half a word being repeated several times.
Okay... does it do this every time? Also, the audio it plays back - is it 'current', or something from when you last used SqueezePlay? And is your wireless connection still running and stable?
There are a number of possibilities for this, but one that immediately springs to mind is the wireless - I've had issues with stuttering audio when the wireless attempts to get more data and then barfs for some reason. Using the vendor wireless driver cured it for me, but this was on BuZz's builds, not on UNR.
Alternatively, it could be something introduced with the latest build - we're always using the latest build of PortAudio and the like, so it's possible that is the cause. Did it never happen prior to v7.7.2?
Some answers:
No, not every time.
The audio seems to be 'current'.
Wireless connection still works fine.
I think it happened before on release 7.7.1 while I wa on UNR 9.10 only.
I see previous reference to you being quite happy with the stability of the Joli build. The jogglers I use squeezeplay on do not do anything else, so I may give this a go.
Thanks,
John
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 9:14 pm
by johnnygal
ARJunior wrote:@johnnygal
I have got the same issue with last build as I had forgotten to edit asound.conf after update.
Try to use simple asound.conf...it should fix your problem...
@Andy
Now, v7.7.2 works like a charm
Thanks.
What is the 'simple' asound.conf? I can see a asound.conf_presqp in the /etc directory. Do I move this to asound.conf?
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 10:01 pm
by johnnygal
johnnygal wrote:ARJunior wrote:@johnnygal
I have got the same issue with last build as I had forgotten to edit asound.conf after update.
Try to use simple asound.conf...it should fix your problem...
@Andy
Now, v7.7.2 works like a charm
Thanks.
What is the 'simple' asound.conf? I can see a asound.conf_presqp in the /etc directory. Do I move this to asound.conf?
OK, think I found it in page 12 of this thread:
pcm.!default{
type: hw
card: 0}
ctl.!default{
type: hw
card: 0}
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Fri Mar 09, 2012 10:25 pm
by johnnygal
No luck with asound.conf. I tried the above, then without the colons which I think were not needed. In each case, the screen just goes blank when I runup squeezeplay.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 10, 2012 4:45 am
by ARJunior
johnnygal wrote:No luck with asound.conf. I tried the above, then without the colons which I think were not needed. In each case, the screen just goes blank when I runup squeezeplay.
File etc/asound.conf should be like this :
Code: Select all
pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
}
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 10, 2012 9:24 am
by offbeatdave
I too have had the stuttering on resume issue on the joggler I have set up for Squeeze only. In the morning it would stutter or be silent. Only way I could fix it was by returning to the basic asound file above. This did reintroduce chipmunk on one station but it seems to be more stable for a pause and resume setup.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Sat Mar 10, 2012 10:22 am
by johnnygal
That's great. Thanks guys. I think I needed the space before the "{". Now running with the simple asound.conf and will see how it goes.
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Mon Mar 12, 2012 10:34 pm
by Batz
Hi all
I have stock O2 OS and BirdsLikeWires install of SqueezePlay. I have a Logitech Media Server on a PC which I can access fine from the Joggler. I also have an old QNAP TS-101 with SlimServer 6.5.4 which I can connect to using SoftSqueeze on my PC. But I cannot connect from the Joggler to the SlimServer! I try switch library but it just fails.
Is the Joggler version of SqueezePlay not able to connect to older versions of Slimserver? Seems odd ...
Ian
Re: SqueezePlay for Joggler (Standalone Native and Ubuntu)
Posted: Tue Mar 13, 2012 10:07 am
by roobarb!
Batz wrote:I have stock O2 OS and BirdsLikeWires install of SqueezePlay. I have a Logitech Media Server on a PC which I can access fine from the Joggler. I also have an old QNAP TS-101 with SlimServer 6.5.4 which I can connect to using SoftSqueeze on my PC. But I cannot connect from the Joggler to the SlimServer! I try switch library but it just fails.
Is the Joggler version of SqueezePlay not able to connect to older versions of Slimserver? Seems odd ...
It is highly possible that SqueezePlay v7.7.2 won't connect to a version of SlimServer as old as v6.5.4. That server version is from before my time of using Squeezebox gear; the guys over at the
Squeezebox Forums would know more about compatibility.