I dunno.
I have / had an issue with the master bedroom touchscreens on the nightstands. I didn't want to use wireless at the time.
The old copper telephone wires were installed with Cat5e in the early 2000's. I had one wall plate behind the bed. The wire was run on an outside wall that was insulated. I used that wire for a managed POE switch that fits in a wall box. The original design was done by 3 Com then purchased by HP.
New ones are Gb managed mini small footprint fit mostly in the box devices. Interesting concept but a bit difficult to manage in enterprise office environments. Imagine for a minute one managed switch per cubicle in a large office.
Using a 5VDC 2.5 AMP POE injector with Joggler
Re: Using a 5VDC 2.5 AMP POE injector with Joggler
- Pete
O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens
Auto mater
O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens
Auto mater