Tested an mSATA to ZIF mini card for Joggler 2 - working

Everything relating to hacking, expanding and modifying the Joggler hardware.
Post Reply
User avatar
pete
Posts: 2882
Joined: Mon Aug 01, 2011 6:33 am
Location: Time Traveler

Tested an mSATA to ZIF mini card for Joggler 2 - working

Post by pete »

Today tested a 1/2 sized mSATA 32Gb ZIF card to work with the Joggler just fine. Only thing is that it is too big to fit over the WLAN USB stick.

Note picture makes it look big but it is much smaller than picture.
msatazif.jpg
- Pete

O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens

Auto mater
User avatar
hawsey
Posts: 2013
Joined: Sun May 22, 2011 11:23 pm
Location: Northumberland

Re: Tested an mSATA to ZIF mini card for Joggler 2 - working

Post by hawsey »

This is using a Joggler with the port soldered on isn't it Pete ?
Happy Joggling
User avatar
pete
Posts: 2882
Joined: Mon Aug 01, 2011 6:33 am
Location: Time Traveler

Re: Tested an mSATA to ZIF mini card for Joggler 2 - working

Post by pete »

Yes.

It is the right length and width. It is too fat though.
- Pete

O2 Jogglers running EFI Ubuntu / Squeezeplayer
OpenPeak Voip Telephony / Zigbee tabletops hardware modded with Seabios / RTC / Ethernet ROM edits / SSD drives running XPe for automation screens

Auto mater
Post Reply