I have small question I installed emgd driver also xorg 1.9.5 I see tat it loads from xorg.log but in glxinfo I still see Software acceleration.
Maybe someone has a clue what can be wrong ,I'm attaching xorg logs.
Thanks.
Code: Select all
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 916.984] X Protocol Version 11, Revision 0
[ 916.984] Build Operating System: Linux 4.4.0-101-generic i686
[ 916.985] Current Operating System: Linux openframe 3.2.53jog1 #1 SMP Tue Dec 10 09:21:21 GMT 2013 i686
[ 916.985] Kernel command line: acpi=force reboot=acpi intel_idle.max_cstate=2 thermal.psv=80 irqpoll BOOT_IMAGE=/vmlinuz-3.2.53jog1 root=LABEL=t3-root ro quiet
[ 916.986] Build Date: 10 December 2017 12:09:03AM
[ 916.986]
[ 916.989] Current version of pixman: 0.30.2
[ 916.992] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 916.997] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 917.006] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 1 00:16:11 2005
[ 917.014] (==) Using config file: "/etc/X11/xorg.conf"
[ 917.017] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 917.026] (==) No Layout section. Using the first Screen section.
[ 917.026] (==) No screen section available. Using defaults.
[ 917.026] (**) |-->Screen "Default Screen Section" (0)
[ 917.026] (**) | |-->Monitor "<default monitor>"
[ 917.026] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 917.026] (**) | |-->Device "Intel EMGD"
[ 917.026] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 917.027] (==) Automatically adding devices
[ 917.027] (==) Automatically enabling devices
[ 917.036] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[ 917.036] Entry deleted from font path.
[ 917.036] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 917.036] Entry deleted from font path.
[ 917.036] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 917.036] Entry deleted from font path.
[ 917.036] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 917.036] Entry deleted from font path.
[ 917.036] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 917.036] Entry deleted from font path.
[ 917.036] (==) FontPath set to:
/usr/share/fonts/X11/misc/
[ 917.036] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 917.036] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 917.036] (II) Loader magic: 0x8220e40
[ 917.036] (II) Module ABI versions:
[ 917.036] X.Org ANSI C Emulation: 0.4
[ 917.036] X.Org Video Driver: 8.0
[ 917.036] X.Org XInput driver : 11.0
[ 917.036] X.Org Server Extension : 4.0
[ 917.038] (--) PCI:*(0:0:2:0) 8086:8108:8086:8119 rev 7, Mem @ 0xd0100000/524288, 0xc0000000/268435456, 0xd0180000/262144, I/O @ 0x0000f070/8
[ 917.038] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 917.038] (II) LoadModule: "extmod"
[ 917.053] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 917.059] (II) Module extmod: vendor="X.Org Foundation"
[ 917.059] compiled for 1.9.5, module version = 1.0.0
[ 917.059] Module class: X.Org Server Extension
[ 917.059] ABI class: X.Org Server Extension, version 4.0
[ 917.059] (II) Loading extension MIT-SCREEN-SAVER
[ 917.059] (II) Loading extension XFree86-VidModeExtension
[ 917.059] (II) Loading extension XFree86-DGA
[ 917.060] (II) Loading extension DPMS
[ 917.060] (II) Loading extension XVideo
[ 917.060] (II) Loading extension XVideo-MotionCompensation
[ 917.060] (II) Loading extension X-Resource
[ 917.060] (II) LoadModule: "dbe"
[ 917.060] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 917.063] (II) Module dbe: vendor="X.Org Foundation"
[ 917.063] compiled for 1.9.5, module version = 1.0.0
[ 917.063] Module class: X.Org Server Extension
[ 917.063] ABI class: X.Org Server Extension, version 4.0
[ 917.063] (II) Loading extension DOUBLE-BUFFER
[ 917.063] (II) LoadModule: "glx"
[ 917.063] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 917.071] (II) Module glx: vendor="X.Org Foundation"
[ 917.080] compiled for 1.9.5, module version = 1.0.0
[ 917.080] ABI class: X.Org Server Extension, version 4.0
[ 917.080] (==) AIGLX enabled
[ 917.080] (II) Loading extension GLX
[ 917.083] (II) LoadModule: "record"
[ 917.084] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 917.087] (II) Module record: vendor="X.Org Foundation"
[ 917.087] compiled for 1.9.5, module version = 1.13.0
[ 917.087] Module class: X.Org Server Extension
[ 917.087] ABI class: X.Org Server Extension, version 4.0
[ 917.087] (II) Loading extension RECORD
[ 917.087] (II) LoadModule: "dri"
[ 917.087] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 917.096] (II) Module dri: vendor="X.Org Foundation"
[ 917.096] compiled for 1.9.5, module version = 1.0.0
[ 917.096] ABI class: X.Org Server Extension, version 4.0
[ 917.096] (II) Loading extension XFree86-DRI
[ 917.096] (II) LoadModule: "dri2"
[ 917.096] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 917.099] (II) Module dri2: vendor="X.Org Foundation"
[ 917.099] compiled for 1.9.5, module version = 1.2.0
[ 917.099] ABI class: X.Org Server Extension, version 4.0
[ 917.099] (II) Loading extension DRI2
[ 917.099] (II) LoadModule: "emgd"
[ 917.099] (II) Loading /usr/lib/xorg/modules/drivers/emgd_drv.so
[ 917.119] (II) Module emgd: vendor="Intel(R) Corporation"
[ 917.119] compiled for 1.9.0, module version = 1.18.3398
[ 917.119] Module class: X.Org Video Driver
[ 917.119] ABI class: X.Org Video Driver, version 8.0
[ 917.120] (II) EMGD: Intel(R) Embedded Media and Graphics Driver version 1.18.3398 for:
Intel US15W Class
[ 917.120] (--) using VT number 7
[ 917.128] (II) EMGD(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 917.128] (==) EMGD(0): RGB weight 888
[ 917.128] (==) EMGD(0): Default visual is TrueColor
[ 917.128] drmOpenDevice: node name is /dev/dri/card0
[ 917.128] drmOpenDevice: open result is 8, (OK)
[ 917.128] drmOpenByBusid: Searching for BusID PCI:00:00:00
[ 917.128] drmOpenDevice: node name is /dev/dri/card0
[ 917.129] drmOpenDevice: open result is 8, (OK)
[ 917.129] drmOpenByBusid: drmOpenMinor returns 8
[ 917.129] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.129] drmOpenDevice: node name is /dev/dri/card1
[ 917.133] drmOpenByBusid: drmOpenMinor returns -1
[ 917.134] drmOpenDevice: node name is /dev/dri/card2
[ 917.139] drmOpenByBusid: drmOpenMinor returns -1
[ 917.139] drmOpenDevice: node name is /dev/dri/card3
[ 917.144] drmOpenByBusid: drmOpenMinor returns -1
[ 917.144] drmOpenDevice: node name is /dev/dri/card4
[ 917.150] drmOpenByBusid: drmOpenMinor returns -1
[ 917.150] drmOpenDevice: node name is /dev/dri/card5
[ 917.155] drmOpenByBusid: drmOpenMinor returns -1
[ 917.155] drmOpenDevice: node name is /dev/dri/card6
[ 917.161] drmOpenByBusid: drmOpenMinor returns -1
[ 917.161] drmOpenDevice: node name is /dev/dri/card7
[ 917.166] drmOpenByBusid: drmOpenMinor returns -1
[ 917.166] drmOpenDevice: node name is /dev/dri/card8
[ 917.172] drmOpenByBusid: drmOpenMinor returns -1
[ 917.172] drmOpenDevice: node name is /dev/dri/card9
[ 917.177] drmOpenByBusid: drmOpenMinor returns -1
[ 917.177] drmOpenDevice: node name is /dev/dri/card10
[ 917.183] drmOpenByBusid: drmOpenMinor returns -1
[ 917.183] drmOpenDevice: node name is /dev/dri/card11
[ 917.188] drmOpenByBusid: drmOpenMinor returns -1
[ 917.188] drmOpenDevice: node name is /dev/dri/card12
[ 917.193] drmOpenByBusid: drmOpenMinor returns -1
[ 917.193] drmOpenDevice: node name is /dev/dri/card13
[ 917.199] drmOpenByBusid: drmOpenMinor returns -1
[ 917.199] drmOpenDevice: node name is /dev/dri/card14
[ 917.204] drmOpenByBusid: drmOpenMinor returns -1
[ 917.204] drmOpenDevice: node name is /dev/dri/card15
[ 917.210] drmOpenByBusid: drmOpenMinor returns -1
[ 917.210] drmOpenDevice: node name is /dev/dri/card0
[ 917.210] drmOpenDevice: open result is 8, (OK)
[ 917.210] drmGetBusid returned ''
[ 917.210] (II) EMGD(0): Chipset: "Intel SCH US15 Chipset"
[ 917.210] (II) EMGD(0): Detected kernel module from EMGD build 3398
[ 917.211] (II) EMGD(0): Checking for new style options
[ 917.211] (II) EMGD(0): Processing version 7.0 options
[ 917.211] (II) EMGD(0): Using configuration 1
[ 917.211] (II) EMGD(0): Checking for US15 specific configuration.
[ 917.211] (II) EMGD(0): Cannot find vBIOS config id
[ 917.211] (II) EMGD(0): Falling back to first available id: 1
[ 917.211] (II) EMGD(0): Checking for non-chipset specific configuration.
[ 917.211] (II) EMGD(0): Setting port_order to 40000
[ 917.211] (II) EMGD(0): Allocated local dtd for port=3 dtdid=1
[ 917.211] (II) EMGD(0): Option processing done!
[ 917.389] (II) EMGD(0): Valid Display Configurations:
[ 917.389] (II) EMGD(0): DC: 0x00000041
[ 917.389] (II) EMGD(0): DC: 0x00000000
[ 917.389] (II) EMGD(0): Using Display Configuration 0x00000041
[ 917.390] (==) EMGD(0): Depth 24, (--) framebuffer bpp 32
[ 917.390] (==) EMGD(0): Using gamma correction (1.0, 1.0, 1.0)
[ 917.390] (II) EMGD(0): 1 modes passed validation checks
[ 917.390] (--) EMGD(0): Virtual size is 800x480 (pitch 0)
[ 917.390] (**) EMGD(0): *Built-in mode "800x480": 33.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 917.390] (II) EMGD(0): Modeline "800x480"x60.0 33.26 800 840 968 1055 480 489 495 524 (31.5 kHz)
[ 917.390] (==) EMGD(0): DPI set to (96, 96)
[ 917.390] (II) Loading sub module "fb"
[ 917.390] (II) LoadModule: "fb"
[ 917.390] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 917.396] (II) Module fb: vendor="X.Org Foundation"
[ 917.396] compiled for 1.9.5, module version = 1.0.0
[ 917.396] ABI class: X.Org ANSI C Emulation, version 0.4
[ 917.396] (II) Loading sub module "ramdac"
[ 917.396] (II) LoadModule: "ramdac"
[ 917.396] (II) Module "ramdac" already built-in
[ 917.396] (II) EMGD(0): General Driver Configuration Options
[ 917.396] (II) EMGD(0): PCF Version: 7.00
[ 917.396] (II) EMGD(0): Configuration ID: 1
[ 917.396] (II) EMGD(0): Primary Display Configuration Options
[ 917.396] (II) EMGD(0): VideoRam (Pixmap Cache): 32768
[ 917.396] (II) EMGD(0): PORT AND DISPLAY OPTIONS
[ 917.396] (II) EMGD(0): Port Order: 40000
[ 917.396] (II) EMGD(0): Display Config: Single
[ 917.396] (II) EMGD(0): Display Detect: Off
[ 917.396] (II) EMGD(0): FB Blend Overlay: Off
[ 917.396] (II) EMGD(0): Subpicture On FB: Off
[ 917.396] (II) EMGD(0): Gang DVO: Off
[ 917.396] (II) EMGD(0): Refresh Rate: 0
[ 917.396] (II) EMGD(0): Clone Width: 0
[ 917.396] (II) EMGD(0): Clone Height: 0
[ 917.396] (II) EMGD(0): Clone Refresh: 0
[ 917.396] (II) EMGD(0): FRAMEBUFFER OPTIONS
[ 917.397] (II) EMGD(0): Shadow FB: Off
[ 917.397] (II) EMGD(0): Tear FB: On
[ 917.397] (II) EMGD(0): Resize: Off
[ 917.397] (II) EMGD(0): GL TEXTURE STREAM OUTPUT: Off
[ 917.397] (II) EMGD(0): FRAMEBUFFER ORIENTATION OPTIONS
[ 917.397] (II) EMGD(0): Rotation: 0 degrees
[ 917.397] (II) EMGD(0): Flip: Off
[ 917.397] (II) EMGD(0): HARDWARE ACCELERATION OPTIONS
[ 917.397] (II) EMGD(0): HW 2D Accel: On
[ 917.397] (II) EMGD(0): HW Cursor: On
[ 917.397] (II) EMGD(0): XVIDEO OPTIONS
[ 917.397] (II) EMGD(0): XVideo: On
[ 917.397] (II) EMGD(0): XVideoBlend: On
[ 917.397] (II) EMGD(0): XVideoMC: Off
[ 917.397] (II) EMGD(0): XVideoKey: 0xff00ff00
[ 917.397] (II) EMGD(0): Overlay Gamma Red: 0x100
[ 917.397] (II) EMGD(0): Overlay Gamma Green: 0x100
[ 917.397] (II) EMGD(0): Overlay Gamma Blue: 0x100
[ 917.397] (II) EMGD(0): Overlay Brightness: 0x8000
[ 917.397] (II) EMGD(0): Overlay Contrast: 0x8000
[ 917.397] (II) EMGD(0): Overlay Saturation: 0x8000
[ 917.397] (II) EMGD(0): Overlay Hue: 0x8000
[ 917.397] (II) EMGD(0): DRI: Off
[ 917.397] (II) EMGD(0): DRI2: On
[ 917.397] (II) EMGD(0): EDID: On
[ 917.397] (II) EMGD(0): QUICKBOOT OPTIONS
[ 917.397] (II) EMGD(0): QuickBoot: 1
[ 917.397] (II) EMGD(0): Seamless: Off
[ 917.397] (II) EMGD(0): Video Input: 0
[ 917.397] (II) EMGD(0): Splash Screen: Off
[ 917.397] (II) EMGD(0): Freeze FB: Off
[ 917.397] (II) EMGD(0): INTERRUPT OPTIONS
[ 917.397] (II) EMGD(0): Polling: Off
[ 917.397] (II) EMGD(0): GLOBAL PER PORT OPTIONS
[ 917.397] (II) EMGD(0): Port 2 (null)
[ 917.397] (II) EMGD(0): Multi-DVO: Off
[ 917.397] (II) EMGD(0): Rotation: 0 degrees
[ 917.397] (II) EMGD(0): Flip: Off
[ 917.397] (II) EMGD(0): Centering: Off
[ 917.398] (II) EMGD(0): RenderScale: Off
[ 917.398] (II) EMGD(0): EDID: Off
[ 917.398] (II) EMGD(0): EDID Avail: 0x5
[ 917.398] (II) EMGD(0): EDID Not Avail: 0x5
[ 917.398] (II) EMGD(0): PANEL INFORMATION
[ 917.398] (II) EMGD(0): FP width: 0
[ 917.398] (II) EMGD(0): FP height: 0
[ 917.398] (II) EMGD(0): BKLT Enable: 0
[ 917.398] (II) EMGD(0): BKLT Method: 0
[ 917.398] (II) EMGD(0): BKLT T1: 0
[ 917.398] (II) EMGD(0): BKLT T2: 0
[ 917.398] (II) EMGD(0): BKLT T3: 0
[ 917.398] (II) EMGD(0): BKLT T4: 0
[ 917.398] (II) EMGD(0): BKLT T5: 0
[ 917.398] (II) EMGD(0): GPIO Pin VDD: 0
[ 917.398] (II) EMGD(0): GPIO Pin VEE: 0
[ 917.398] (II) EMGD(0): GPIO Pin BKLT:0
[ 917.398] (II) EMGD(0): DVO i2c pin: 0
[ 917.398] (II) EMGD(0): DVO i2c DAB: 0
[ 917.398] (II) EMGD(0): DVO i2c speed:0
[ 917.398] (II) EMGD(0): DVO ddc pin: 0
[ 917.398] (II) EMGD(0): DVO ddc speed:0
[ 917.398] (II) EMGD(0): Number DTD's: 0
[ 917.398] (II) EMGD(0): Number Attr's: 0
[ 917.398] (II) EMGD(0): Port 4 LVDS
[ 917.398] (II) EMGD(0): Multi-DVO: Off
[ 917.398] (II) EMGD(0): Rotation: 0 degrees
[ 917.398] (II) EMGD(0): Flip: Off
[ 917.398] (II) EMGD(0): Centering: Off
[ 917.398] (II) EMGD(0): RenderScale: Off
[ 917.398] (II) EMGD(0): EDID: Off
[ 917.398] (II) EMGD(0): EDID Avail: 0x0
[ 917.398] (II) EMGD(0): EDID Not Avail: 0x4
[ 917.398] (II) EMGD(0): PANEL INFORMATION
[ 917.398] (II) EMGD(0): FP width: 0
[ 917.398] (II) EMGD(0): FP height: 0
[ 917.398] (II) EMGD(0): BKLT Enable: 0
[ 917.398] (II) EMGD(0): BKLT Method: 0
[ 917.398] (II) EMGD(0): BKLT T1: 0
[ 917.398] (II) EMGD(0): BKLT T2: 0
[ 917.398] (II) EMGD(0): BKLT T3: 0
[ 917.399] (II) EMGD(0): BKLT T4: 0
[ 917.399] (II) EMGD(0): BKLT T5: 0
[ 917.399] (II) EMGD(0): GPIO Pin VDD: 0
[ 917.399] (II) EMGD(0): GPIO Pin VEE: 0
[ 917.399] (II) EMGD(0): GPIO Pin BKLT:0
[ 917.399] (II) EMGD(0): DVO i2c pin: 0
[ 917.399] (II) EMGD(0): DVO i2c DAB: 0
[ 917.399] (II) EMGD(0): DVO i2c speed:0
[ 917.399] (II) EMGD(0): DVO ddc pin: 0
[ 917.399] (II) EMGD(0): DVO ddc speed:0
[ 917.399] (II) EMGD(0): Number DTD's: 1
[ 917.399] (II) EMGD(0): 1-width: 800
[ 917.399] (II) EMGD(0): 1-height: 480
[ 917.399] (II) EMGD(0): 1-refresh: 0
[ 917.399] (II) EMGD(0): 1-dclk: 33264
[ 917.399] (II) EMGD(0): 1-horz total: 0
[ 917.399] (II) EMGD(0): 1-horz b_start:799
[ 917.399] (II) EMGD(0): 1-horz b_end: 1055
[ 917.399] (II) EMGD(0): 1-horz s_start:840
[ 917.399] (II) EMGD(0): 1-horz s_end: 968
[ 917.399] (II) EMGD(0): 1-vert total: 0
[ 917.399] (II) EMGD(0): 1-vert b_start:479
[ 917.399] (II) EMGD(0): 1-vert b_end: 524
[ 917.399] (II) EMGD(0): 1-vert s_start:489
[ 917.399] (II) EMGD(0): 1-vert s_end: 495
[ 917.399] (II) EMGD(0): 1-flags: 0x20000
[ 917.399] (II) EMGD(0): Number Attr's: 7
[ 917.399] (==) Depth 24 pixmap format is 32 bpp
[ 917.405] drmOpenDevice: node name is /dev/dri/card0
[ 917.405] drmOpenDevice: open result is 9, (OK)
[ 917.405] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.406] drmOpenDevice: node name is /dev/dri/card0
[ 917.406] drmOpenDevice: open result is 9, (OK)
[ 917.406] drmOpenByBusid: drmOpenMinor returns 9
[ 917.406] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.406] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.480] drmOpenDevice: node name is /dev/dri/card0
[ 917.480] drmOpenDevice: open result is 9, (OK)
[ 917.480] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.480] drmOpenDevice: node name is /dev/dri/card0
[ 917.480] drmOpenDevice: open result is 9, (OK)
[ 917.480] drmOpenByBusid: drmOpenMinor returns 9
[ 917.480] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.480] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.481] drmOpenDevice: node name is /dev/dri/card0
[ 917.481] drmOpenDevice: open result is 9, (OK)
[ 917.481] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.481] drmOpenDevice: node name is /dev/dri/card0
[ 917.481] drmOpenDevice: open result is 9, (OK)
[ 917.481] drmOpenByBusid: drmOpenMinor returns 9
[ 917.481] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.481] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.482] drmOpenDevice: node name is /dev/dri/card0
[ 917.482] drmOpenDevice: open result is 9, (OK)
[ 917.482] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.482] drmOpenDevice: node name is /dev/dri/card0
[ 917.482] drmOpenDevice: open result is 9, (OK)
[ 917.483] drmOpenByBusid: drmOpenMinor returns 9
[ 917.483] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.483] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.512] (II) EMGD(0): [DRI2] Setup complete
[ 917.512] (II) EMGD(0): [DRI2] DRI driver: emgd
[ 917.512] (II) EMGD(0): DRI2 initialization complete.
[ 917.524] (II) UXA(0): Driver registered support for the following operations:
[ 917.524] (II) solid
[ 917.524] (II) copy
[ 917.524] (II) composite (RENDER acceleration)
[ 917.524] (II) EMGD(0): [hal to drm] Communication With DRM Failed
[ 917.524] (II) EMGD(0): Video acceleration initialization complete
[ 917.524] (==) EMGD(0): Backing store disabled
[ 917.549] drmOpenDevice: node name is /dev/dri/card0
[ 917.550] drmOpenDevice: open result is 10, (OK)
[ 917.550] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.550] drmOpenDevice: node name is /dev/dri/card0
[ 917.550] drmOpenDevice: open result is 10, (OK)
[ 917.550] drmOpenByBusid: drmOpenMinor returns 10
[ 917.550] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.550] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.550] drmOpenDevice: node name is /dev/dri/card0
[ 917.550] drmOpenDevice: open result is 10, (OK)
[ 917.550] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.550] drmOpenDevice: node name is /dev/dri/card0
[ 917.550] drmOpenDevice: open result is 10, (OK)
[ 917.550] drmOpenByBusid: drmOpenMinor returns 10
[ 917.550] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.550] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.554] (II) EMGD(0): Hardware Cursor Initialization complete.
[ 917.554] (==) EMGD(0): Silken mouse enabled
[ 917.554] (==) EMGD(0): DPMS enabled
[ 917.556] (==) RandR enabled
[ 917.556] (II) Initializing built-in extension Generic Event Extension
[ 917.556] (II) Initializing built-in extension SHAPE
[ 917.556] (II) Initializing built-in extension MIT-SHM
[ 917.556] (II) Initializing built-in extension XInputExtension
[ 917.556] (II) Initializing built-in extension XTEST
[ 917.556] (II) Initializing built-in extension BIG-REQUESTS
[ 917.556] (II) Initializing built-in extension SYNC
[ 917.556] (II) Initializing built-in extension XKEYBOARD
[ 917.557] (II) Initializing built-in extension XC-MISC
[ 917.557] (II) Initializing built-in extension XINERAMA
[ 917.557] (II) Initializing built-in extension XFIXES
[ 917.557] (II) Initializing built-in extension XFree86-Bigfont
[ 917.557] (II) Initializing built-in extension RENDER
[ 917.557] (II) Initializing built-in extension RANDR
[ 917.557] (II) Initializing built-in extension COMPOSITE
[ 917.557] (II) Initializing built-in extension DAMAGE
[ 917.690] drmOpenDevice: node name is /dev/dri/card0
[ 917.691] drmOpenDevice: open result is 10, (OK)
[ 917.691] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.691] drmOpenDevice: node name is /dev/dri/card0
[ 917.691] drmOpenDevice: open result is 10, (OK)
[ 917.691] drmOpenByBusid: drmOpenMinor returns 10
[ 917.691] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.691] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.691] drmOpenDevice: node name is /dev/dri/card0
[ 917.691] drmOpenDevice: open result is 10, (OK)
[ 917.691] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.691] drmOpenDevice: node name is /dev/dri/card0
[ 917.691] drmOpenDevice: open result is 10, (OK)
[ 917.691] drmOpenByBusid: drmOpenMinor returns 10
[ 917.691] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.691] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.721] drmOpenDevice: node name is /dev/dri/card0
[ 917.721] drmOpenDevice: open result is 10, (OK)
[ 917.721] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.721] drmOpenDevice: node name is /dev/dri/card0
[ 917.721] drmOpenDevice: open result is 10, (OK)
[ 917.721] drmOpenByBusid: drmOpenMinor returns 10
[ 917.721] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.721] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.730] drmOpenDevice: node name is /dev/dri/card0
[ 917.730] drmOpenDevice: open result is 11, (OK)
[ 917.730] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.730] drmOpenDevice: node name is /dev/dri/card0
[ 917.730] drmOpenDevice: open result is 11, (OK)
[ 917.730] drmOpenByBusid: drmOpenMinor returns 11
[ 917.730] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.730] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.730] drmOpenDevice: node name is /dev/dri/card0
[ 917.730] drmOpenDevice: open result is 11, (OK)
[ 917.731] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.731] drmOpenDevice: node name is /dev/dri/card0
[ 917.731] drmOpenDevice: open result is 11, (OK)
[ 917.731] drmOpenByBusid: drmOpenMinor returns 11
[ 917.731] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.731] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.731] drmOpenDevice: node name is /dev/dri/card0
[ 917.731] drmOpenDevice: open result is 11, (OK)
[ 917.731] drmOpenByBusid: Searching for BusID PCI:00:02:00
[ 917.731] drmOpenDevice: node name is /dev/dri/card0
[ 917.731] drmOpenDevice: open result is 11, (OK)
[ 917.731] drmOpenByBusid: drmOpenMinor returns 11
[ 917.731] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 917.731] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 917.765] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 917.765] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 917.765] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 917.765] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 917.765] (II) AIGLX: Loaded and initialized /usr/lib/dri/emgd_dri.so
[ 917.765] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 917.994] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event2)
[ 917.994] (II) No input driver/identifier specified (ignoring)
[ 917.995] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event3)
[ 917.995] (II) No input driver/identifier specified (ignoring)
[ 917.996] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event4)
[ 917.996] (II) No input driver/identifier specified (ignoring)
[ 917.997] (II) config/udev: Adding input device HDA Intel MID Line-out (/dev/input/event5)
[ 917.997] (II) No input driver/identifier specified (ignoring)
[ 917.997] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event6)
[ 917.998] (II) No input driver/identifier specified (ignoring)
[ 918.003] (II) config/udev: Adding input device AmSC OpenPeak Touchscreen Hyup02 (/dev/input/event1)
[ 918.003] (**) AmSC OpenPeak Touchscreen Hyup02: Applying InputClass "evdev pointer catchall"
[ 918.003] (II) LoadModule: "evdev"
[ 918.003] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 918.006] (II) Module evdev: vendor="X.Org Foundation"
[ 918.006] compiled for 1.9.5, module version = 2.3.3
[ 918.006] Module class: X.Org XInput Driver
[ 918.006] ABI class: X.Org XInput driver, version 11.0
[ 918.007] (**) AmSC OpenPeak Touchscreen Hyup02: always reports core events
[ 918.007] (**) AmSC OpenPeak Touchscreen Hyup02: Device: "/dev/input/event1"
[ 918.007] (II) AmSC OpenPeak Touchscreen Hyup02: Found 3 mouse buttons
[ 918.007] (II) AmSC OpenPeak Touchscreen Hyup02: Found absolute axes
[ 918.007] (II) AmSC OpenPeak Touchscreen Hyup02: Found x and y absolute axes
[ 918.007] (II) AmSC OpenPeak Touchscreen Hyup02: Configuring as mouse
[ 918.007] (**) AmSC OpenPeak Touchscreen Hyup02: YAxisMapping: buttons 4 and 5
[ 918.007] (**) AmSC OpenPeak Touchscreen Hyup02: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 918.007] (II) XINPUT: Adding extended input device "AmSC OpenPeak Touchscreen Hyup02" (type: MOUSE)
[ 918.007] (II) AmSC OpenPeak Touchscreen Hyup02: initialized for absolute axes.
[ 918.008] (II) config/udev: Adding input device AmSC OpenPeak Touchscreen Hyup02 (/dev/input/js0)
[ 918.008] (II) No input driver/identifier specified (ignoring)
[ 918.009] (II) config/udev: Adding input device AmSC OpenPeak Touchscreen Hyup02 (/dev/input/mouse1)
[ 918.009] (II) No input driver/identifier specified (ignoring)
[ 918.016] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400e (/dev/input/event0)
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: Applying InputClass "evdev pointer catchall"
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: Applying InputClass "evdev keyboard catchall"
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: always reports core events
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: Device: "/dev/input/event0"
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found 20 mouse buttons
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found scroll wheel(s)
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found relative axes
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found x and y relative axes
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found absolute axes
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Found keys
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Configuring as mouse
[ 918.017] (II) Logitech Unifying Device. Wireless PID:400e: Configuring as keyboard
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: YAxisMapping: buttons 4 and 5
[ 918.017] (**) Logitech Unifying Device. Wireless PID:400e: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 918.017] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:400e" (type: KEYBOARD)
[ 918.017] (**) Option "xkb_rules" "evdev"
[ 918.017] (**) Option "xkb_model" "pc105"
[ 918.017] (**) Option "xkb_layout" "us"
[ 918.018] (II) Logitech Unifying Device. Wireless PID:400e: initialized for relative axes.
[ 918.018] (WW) Logitech Unifying Device. Wireless PID:400e: ignoring absolute axes.
[ 918.019] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400e (/dev/input/mouse0)
[ 918.019] (II) No input driver/identifier specified (ignoring)