SqueezePlay OS (Version 2) for OpenFrame
Re: SqueezePlay OS (Version 2) for OpenFrame
Have you got a USB wifi card installed in your Joggler? Might sound like a stupid question but I was tearing my hair out with a similar issue, until I discovered the 'betting shop' ebay Jogglers don't have Wifi cards.
Andy.
Andy.
Re: SqueezePlay OS (Version 2) for OpenFrame
you're joking! Why on earth would they remove them?andyf wrote:Have you got a USB wifi card installed in your Joggler? Might sound like a stupid question but I was tearing my hair out with a similar issue, until I discovered the 'betting shop' ebay Jogglers don't have Wifi cards.
Andy.
- JimbobVFR400
- Posts: 264
- Joined: Fri Jul 20, 2012 8:39 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Maybe they had them booting from a USB key installed in place of the card, that's what I do with SqPOS on my Joggler that runs LMS. Another possibility is removing any vectors for dodgy attacks on the terminals.dwl99 wrote:you're joking! Why on earth would they remove them?andyf wrote:Have you got a USB wifi card installed in your Joggler? Might sound like a stupid question but I was tearing my hair out with a similar issue, until I discovered the 'betting shop' ebay Jogglers don't have Wifi cards.
Andy.
Re: SqueezePlay OS (Version 2) for OpenFrame
Just checked mine, as I have not really used it yet, only to make sure it worked
(Mine does have a wifi card)
(Mine does have a wifi card)
Jogglermaniac
Re: SqueezePlay OS (Version 2) for OpenFrame
Weird. both of mine are missing their wifi cards.
Re: SqueezePlay OS (Version 2) for OpenFrame
Hi Andy mine (3 devices) do have a internal wifi card.andyf wrote:Have you got a USB wifi card installed in your Joggler? Might sound like a stupid question but I was tearing my hair out with a similar issue, until I discovered the 'betting shop' ebay Jogglers don't have Wifi cards.
Andy.
Did you open your joggler to check if the card is present (or do you just guess because there is no driver loaded)?
Last edited by palindrom on Fri Mar 14, 2014 7:55 pm, edited 1 time in total.
SqueezeOS (Version 2) for OpenFrame/O2: USBIP
Hi all,
I installed USBIP on my joggler to share the USB device to other systems:
http://usbip.sourceforge.net/
Unfortunately its not working.
Both USBIPD (daemon) and USBIP (client) are reporting errors.
@roobarb!: Is there any chance to have those parameters enables in some future release of SqueezeOS?
I installed USBIP on my joggler to share the USB device to other systems:
http://usbip.sourceforge.net/
Code: Select all
sudo apt-get update
sudo apt-get install usbip
Both USBIPD (daemon) and USBIP (client) are reporting errors.
joggler@openframe:~$ sudo usbipd -D
usbip err: stub_driver.c: 33 (open_sysfs_stub_driver) usbip_common_mod.ko and usbip.ko must be loaded
** (process:2426): ERROR **: driver open failed
With reference to this thread: https://bugs.launchpad.net/ubuntu/+sour ... bug/900384 the kernel needs to be changed.joggler@openframe:~$ sudo usbip --port
/sys/bus/platform/drivers/vhci_hcd is not found
load usbip_common_mod.ko and vhci-hcd.ko !
Did anyone of you succeed installing USBIPD?The Ubuntu Kernel Team's config policy is to disable experimental options until it is requested they be enabled. Based on the information requested in this bug, I have enabled the following in the Precise 12.04 kernel:
CONFIG_USBIP_CORE=m
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VHCI_HCD=m
@roobarb!: Is there any chance to have those parameters enables in some future release of SqueezeOS?
-
- Posts: 38
- Joined: Mon Feb 24, 2014 6:07 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Hi again, guys ..... ok, I am struggling a little bit with this .....
I have sqpos and LMS running on internal usb with ext hdd attached to ext usb .... I do most of my computing on a windows machine and want to simply add more music files via my network to the ext hdd on the joggler BUT ..... this is where my knowledge of Nfs or samba runs out ....
help please what are the simple steps to setting this up .....
I have sqpos and LMS running on internal usb with ext hdd attached to ext usb .... I do most of my computing on a windows machine and want to simply add more music files via my network to the ext hdd on the joggler BUT ..... this is where my knowledge of Nfs or samba runs out ....
help please what are the simple steps to setting this up .....
Re: SqueezePlay OS (Version 2) for OpenFrame
roughlychiron wrote:Hi again, guys ..... ok, I am struggling a little bit with this .....
I have sqpos and LMS running on internal usb with ext hdd attached to ext usb .... I do most of my computing on a windows machine and want to simply add more music files via my network to the ext hdd on the joggler BUT ..... this is where my knowledge of Nfs or samba runs out ....
help please what are the simple steps to setting this up .....
I recommend using a ssh capable program like WinSCP http://winscp.net/
there is no need to struggle around width NFS an/or samba.
- JimbobVFR400
- Posts: 264
- Joined: Fri Jul 20, 2012 8:39 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
I was going to suggest similar as a quick and simple option, however if it was me I would get Samba setup because then I could also use the files on my PCs and other devices and access them as a share directly with utilities like mp3tag.palindrom wrote:I recommend using a ssh capable program like WinSCP http://winscp.net/
there is no need to struggle around width NFS an/or samba.
Sadly I don't have any pointers for doing this as I don't use a drive connected to my Joggler.
Last edited by JimbobVFR400 on Sun Mar 16, 2014 5:15 pm, edited 1 time in total.
Re: SqueezePlay OS (Version 2) for OpenFrame
I followed this guide and set up a share with guest access. Works a treat. http://www.howtogeek.com/howto/ubuntu/i ... on-ubuntu/
And the tweaks from this to enable guest access http://amazingrando.wordpress.com/2007/ ... word-easy/
And the tweaks from this to enable guest access http://amazingrando.wordpress.com/2007/ ... word-easy/
-
- Posts: 38
- Joined: Mon Feb 24, 2014 6:07 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Great, thanx guys .... I tried winscp and whilst I was able to copy from the hdd attached to joggler so far I am denied permission to copy to the hdd ..... am I missing a simple thing?
will look at the other suggestions also ....
cheers
will look at the other suggestions also ....
cheers
Re: SqueezePlay OS (Version 2) for OpenFrame
If logging in as a user, you'll need that user to 'own' the folder structure, else you can't write to it.
If you harddrive is mounted as /media/exthdd and the user is joggler the command would be:
If you harddrive is mounted as /media/exthdd and the user is joggler the command would be:
Code: Select all
sudo chown -R joggler /media/exthdd
-
- Posts: 38
- Joined: Mon Feb 24, 2014 6:07 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Tried your suggestion Andi ..... 'Operation not permitted'
Re: SqueezePlay OS (Version 2) for OpenFrame
What file system is on your external HDD?
And if it's NTFS, have you installed and setup NTFS-3G or not?
(If not - there's your problem - Linux supports NTFS as read only. You need to add NTFS-3G from the apt-get repository and configure the drive to mount using that instead.. Will await your reply to give details though).
And if it's NTFS, have you installed and setup NTFS-3G or not?
(If not - there's your problem - Linux supports NTFS as read only. You need to add NTFS-3G from the apt-get repository and configure the drive to mount using that instead.. Will await your reply to give details though).
-
- Posts: 38
- Joined: Mon Feb 24, 2014 6:07 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
it's a 2tb reformatted to fat32 .... which I hoped would simplify everything lol
Re: SqueezePlay OS (Version 2) for OpenFrame
How have you mounted it? Did it do it automatically or did you add it to fstab ?
Actually never worked with FAT32 under Linux as the 4Gb is too limiting for me so have always used ext4 or NTFS!
Actually never worked with FAT32 under Linux as the 4Gb is too limiting for me so have always used ext4 or NTFS!
-
- Posts: 711
- Joined: Sun May 13, 2012 4:42 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Are you using winscp as sudo?
-
- Posts: 38
- Joined: Mon Feb 24, 2014 6:07 pm
Re: SqueezePlay OS (Version 2) for OpenFrame
Andi - I think it mounted automatically as I simply plugged it into the side and browsed straight to it in LMS
ilovemyjoggler - I am a complete Linux noob and not quite sure what you mean ... I installed winscp on my PC and it connected to the joggler ok and will allow me to copy music from joggler to PC but not the other way around
clear as mud haha
ilovemyjoggler - I am a complete Linux noob and not quite sure what you mean ... I installed winscp on my PC and it connected to the joggler ok and will allow me to copy music from joggler to PC but not the other way around
clear as mud haha