O2 Joggler Forum

sudo fsck /dev/sda2 fsck from util-linux 2.31.1 e2fsck 1.44.1 (24-Mar-2018) ROOT19D0 contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Entry 'NowPlaying.lua' in /home/squeezeplay/.squeezeplay/userpath/settings (15061) h...

Just had file system go RO again (on reboot) dmesg [ 22.165245] EXT4-fs error (device sda2): ext4_lookup:1446: inode #15061: comm jive: deleted inode referenced: 15067 [ 22.167449] EXT4-fs (sda2): Remounting filesystem read-only Annoying consequence if that Jive can no longer access the Now Playing ...

One thing I have noticed as missing (because I use it on the old SQPOS) is the "Display Standby" function in Settings/Screen
I usually set this to 60 mins so that the screen goes off during a long listening session knowing that a quick tap brings it back.

From the outside it looks like a Joggler ... but the back has embossed Openpeak and the sticky label says Openpeak not and for the model number (on the sticker) it says OPENFRAMEBS rather than AO2JOGXN. edit: I have the handset as well ... I tried to get that handset to mate with my local DECT base ...

Possible issue ... I suspect that the MAC address is saved rather than being calculated each time ... with the consequence that when I took a USB stick from one Joggler and ran it in another the MAC address went with it. I can see that this could be useful since LMS uses the claimed MAC address to a...

Hmm. So what do your working /home/squezeplay/.asoundrc and/or /etc/asound.conf contain? I've killed that installation and am running on a different Joggler now (but from same USB stick and cables and amp) ... and it is behaving better. So perhaps there is a hardware problem lurking in the other on...

Update ... looks like mounting as read-only is what it does when a bad error happens. So I have started again from scratch. I suspect that the corruption happened when I pulled a 3.5mm jack out of the socket in the back ... nasty screeching sound and screen overwritten with stuff (maybe a mammoth me...

An odd thing ... ls: cannot access '/home/squeezeplay/.squeezeplay/userpath/settings/NowPlaying.lua': Input/output error which I presume is why I cannot get to the Now Playing screen in Jive I see that the file system is set as Read-Only ... so in theory it should not be corruptible ... but it is. A...

I had a go at getting a USB audio device working (along with booting from USB) by putting a USB hub in place. It allowed me to set things up worked - but on the next reboot there was no Squeezeplay any more and it dropped to a terminal prompt. I managed to get things working again (to get Squeezepla...

I've left it playing for an hour and it feels quite a lot warmer to the touch than another Joggler playing via SQPOS.
Is there anything I can adjust (clock speed perhaps?) to have it run cooler?
I've just set backlight to Automatic instead of the default of 60% to see if that cools it a bit.

... edited /boot/network.yaml and now have WiFi

Wish I had read the whole page when downloading - instead of simply downloading, flashing and booting.
At least I worked out how to setup the WiFi and was later pleased to find it was the documented way of doing it

ah ... no WiFi config offered from SqueezePlay menus - at least I have not found it yet (standard Joggler).

Up and running here.
Was useful that it popped up the IP address on the login screen as I had not plugged a hub in to only had the USB stick .... so could SSH into the IP address that it showed on screen.
Now off to try the WiFi.

Well done.

From me too

Glad you said that as I was getting twitchy when I saw a cheap one in UK.
Will hold off at least until you announce breakthrough

I have absolutely no compelling need but still ...

Will do.
We have worked out a split.

Hi Pete,

It is in the list of 3rd-party plugins in LMS - so installing it is simply a matter of enabling 3rd-party plugins and ticking the box for "Radio France".
Announcement of the releases is at https://forums.slimdevices.com/showthre ... -FIP-radio

My main LMS work is the Radio France plug-in (FIP etc) to show track details.
If that qualifies and no better claimant turns up then I'd happily provide a home to some or all.

Great offer.

hawsey wrote:Do we know who is selling these ? first post and all that ? FYI .

Judging by the other post, now deleted, I think you are right.
Might as well delete these recent messages and that account flagged as very suspect.