O2 Joggler Forum

@stripwax Thanks for tip, can confirm it works of@openframe:~$ sudo nano /usr/lib/systemd/system/startx.service [sudo] password for of: of@openframe:~$ sudo systemctl restart startx.service Warning: The unit file, source configuration file or drop-ins of startx.service changed on di sk. Run 'systemc...

@Paul Webster I have changed the LMS Streaming mode for HTTP(S) to Normal streaming I also changed the Joggler output to the buld in speaker "internal [Direct]" I have been playing it for about an hour or so now, with just a couple of short pauses for a little rebuffer. The following behav...

@Paul Webster There was another rebuffer during a Station advert / promotion During this time, the screen retained the image of the last played track After the station info the next track played through but the displayed info did not change There was another Station ident, then the next track commen...

Early days yet :) One brief rebuffer but seems quite good, some tracks have album art, some dont (might just be an early streaming glitch) https://i.postimg.cc/wv8Bydxq/pepper1.jpg https://i.postimg.cc/8k3w3KCR/pepper2.jpg https://i.postimg.cc/htFnS12x/pepper3.jpg File Format: AAC Sample Rate: 44.1 ...

I have been able to make it exit a lot ... too many times to be able to switch to SqueezePlay on Bookworm - this is because I am using it on my desktop as the primary test player when I am adding new stations to "Radio Now Playing". Can someone else confirm that it exists for them as well...

I have experienced the First thing to note - it drops me into an interactive terminal session that is logged in as squeezeplay This mostly seems to happen when I try to configure a dac as "External [Direct] and Squeezeplay does not recognise the dac. Changing the dac resolves the issue. I don't...

@Paul Webster

This may be useful?


viewtopic.php?p=33585#p33585

ronnie

@roobarb!

Thanks Boss

ronnie

I have this up and running with a Topping DX3 Pro dac attatched. I used https://www.jogglerwiki.com/forum/viewtopic.php?f=2&t=5141 and changed the version to squeezelite-1.9.9.1421-i686.tar.gz I tried to create the reboot/shutdown script from your Bullseye but without any success :roll: ronnie

@stripwax Thanks for the feedback, I have corrected my typo :oops: :oops: and can confirm your reboot/shutdown works on Bullseye :) The old SQpos had a "refresh" button if I remember correctly. sudo systemctl restart startx.service works for me, I see the Squeezeplay restart on the joggle...

If you do as Mr Webster suggests and you still have playback problems (using the Joggler speakers or headphone jack) then, on the Joggler, go to Settings > Audio Settings > Audio Interface > and select Internal(Direct) as output. Then open a terminal and either sudo reboot or sudo systemctl restart ...

Ok, full reinstall of Bullseye (same version as before) and it seems to be much happier. Must have been something corrupted on the memory stick. Now Playing is working as it should. Having said that, BBC Sounds is not working for me. Does that work for you on both Bullseye AND Bookworm, or only on ...

I would say, depends on usage

I was surprised to fid that Bookworm image allowed playback through the default audio output without reconfiguration

Both OS use their respective LTS kernels, so it's a bit "evens-Stevens"

Bookworm will also continue with updates for longer I guess

ronnie

Also tried Bookworm, actually I couldn't get wifi to work at all; the settings in my network.yaml seemed to be ignored entirely. Despite writing the correct network.yaml, all evidence seemed to be that it was still using the default YOURWIFINAME. What's the recommendation, persist with Bullseye (be...

https://openbeak.net/openframe/images/debian/bookworm/latest/ https://openbeak.net/openframe/images/debian/bookworm/6.1/6.1.56op/ blank. Expected? Prior version - should I try this one instead? https://openbeak.net/openframe/images/debian/bookworm/6.1/6.1.55op/ I would use the prior one (but rememb...

@stripwax I just ran an install of the last Bullseye and all is well Playing now screen is working I ran sudo apt update, installed the update and rebooted Then, sudo apt update again and sudo /usr/local/sbin/of-install squeezeplay I did this using the Wireless connection to the network and the OS ...

gazza1101 wrote: ↑Mon Sep 25, 2023 9:03 pm Yes, i did that and it did complete, I have tried repeating it and get the same error.

I have sometimes gotten that error but have just repeated the command and it has run.

Try this,

sudo apt update

then

sudo /usr/local/sbin/of-install squeezeplay

I have just tried it and it worked

ronnie

gazza1101 wrote: ↑Mon Sep 25, 2023 6:48 pm Thanks again:)
After entering the line 'sudo apt of-install squeezeplay' I get an error E: Invalid operation of install'

Did you first run
and if so, did it complete?


ronnie

Thanks for the reply, I got an error 'connection refused', not used Putty before, did not see anywhere to put in login details just the IP address? Open PuTTY and enter the IP Address of the joggler (you can also use openframe.local but wait for a minute or two because it takes the joggler some tim...

Oh, right! :) I think better to use the newer Bullseye Image If you are using a Windows OS computer; Download https://openbeak.net/openframe/images/debian/bullseye/latest/ Burn the image (the file ending .img.gz) to a usb stick (I use the RPI Imager tool mostly, but Balana Etcher works as well) Put ...