O2 Joggler Forum

Hmm, I may have answered my own question. There doesn't seem to be any I2S reference on the STAC9202 datasheet... I think you would have to “steal” the signals from the appropriate pins of the STAC9202 or the component that is feeding the pin. https://en.m.wikipedia.org/wiki/I%C2%B2S Pins 4, 5,6 wo...

I have an old Qnap NAS TS121 I found this https://askubuntu.com/questions/1050460/how-to-mount-smb-share-on-ubuntu-18-04 which referenced https://wiki.ubuntu.com/MountWindowsSharesPermanently I had success with //192.168.1.**/Squeezebox /mnt/Music cifs username=admin,password=*******,uid=1000,iocha...

Further progress -I can manually mount the share using: sudo mount -t cfs //192.168.0.13/share /mnt/music p/w "guest" but I cannot find any format that will work in /etc/fstab I am running with the temporary manual mount for the time being but any suggestions for a format for /etc/fstab ap...

I made a fresh install today (porridge gives one get and go :) ). Installed Squeezeplay, commented out the line in /etc/fstab Then rebooted. Used squeezeplay for a short while then installed LMS v7.9.2 (this is an install for someone else). Opened the LMS web gui and installed a few plugins and the...

Man in a van wrote: ↑Thu Jun 04, 2020 10:46 pm Just puli the plug and see if it come up tomorrow.
sudo service logitechmediaserver status will tell if it is running

it does seem to be running according to the service status although I am not able to connect to its web page? Will try again tomorrow.

I did LMS install this way: - login to the Joggler via SSH - download the LMS package, eg: wget http://downloads.slimdevices.com/nightly/8.0/lms/c076108e229abcdf9f42a0bcceb4722cbd62d636/logitechmediaserver_8.0.0~1580708662_i386.deb - install it: dpkg -i logitechmediaserver_8.0.0~1580708662_i386.deb...

I did LMS install this way: - login to the Joggler via SSH - download the LMS package, eg: wget http://downloads.slimdevices.com/nightly/8.0/lms/c076108e229abcdf9f42a0bcceb4722cbd62d636/logitechmediaserver_8.0.0~1580708662_i386.deb - install it: dpkg -i logitechmediaserver_8.0.0~1580708662_i386.deb...

Hi Guys Being furloughed, I thought I would try and get some use out of the two Jogglers I have lying about so visited the forum to be pleasantly surprised that there is still some activity happening! I assumed Roobarb would have retired by now! :D Anyway, I am looking for some help. I would like to...

Brilliant. That worked! Thanks Hawsey.


Sent from my iPhone using Tapatalk

I have the same issue if a solution can be found.


Sent from my iPhone using Tapatalk

So .... did you create a new mount point directory, eg. /mnt/music ? You have to do this as root user, eg. sudo mkdir /mnt/music I have encountered OS setups where the fstab entry doesn't work and where the full mount command needs to be used. But, unless you want to spend more time figuring out a ...

Here's my fstab entry - edit yours as required: //192.168.0.1/volume9 /mnt/hd1 cifs username=guest,password= I created /mnt/hd1 as the mount point Tried this and a couple of dozen other variants but no joy. I have given up and just used a memory stick backup of my other joggler which I think is on ...

castalla wrote:Here's my fstab entry - edit yours as required:

//192.168.0.1/volume9 /mnt/hd1 cifs username=guest,password=

I created /mnt/hd1 as the mount point

Thank you Castalla!
I will give that a try when I get home.
Many thanks

I can advise about cifs for the fstab. You need to set up a mount directory using mkdir Do you have root access? Ok so I have looked into this a bit more. Roobarb's applet does write to Fstab, however the share doesn't mount. So I installed CIFS-utils and tried the line in Fstab for mounting with C...

So as mentioned above, here are my two completed small LMS install packages for use with SqueezePlayOS, particularly for installation to the internal memory where space is very limited. There are two versions: v7.8.1 (reduced to 40MB download from 117Mb) and v7.9.0 (reduced to 45MB download from 12...

First - check that you are using a valid ip address. The value you give in your post is incorrect. It should read 192.168.1.254 You don't need the name. You should be able to discover the path by using windows file explorer to navigate to the actual 'drive' - properties will show the values you nee...

Hi Guys. So I seem to be having no success in mounting a share with Roobarb's inbuilt applet. The share is an unprotected hard drive that is on usb1 on my BTHub5 which has an IP address of 192.1681.254 Roobarb's applet is in 2 parts. The first part is the IP address and I presume that I enter it wit...

Hi guys, I need to use one of my Jogglers purely as a LMS server on internal memory. What is the best lightweight base to use? I also need CIFS as NFS is not working for me to mount public shares. SqPOS is difficult to make work on internal memory with these constraints.
Any ideas?

Try this from castalla, it worked for me on the latestes SQPOS sudo apt-get update && sudo apt-get install python-software-properties sudo apt-get install software-properties-common sudo apt-get update sudo apt-add-repository ppa:samrog131/ppa sudo apt-get update sudo apt-get install ffmpeg...

Is there any alternative script that I can try? I have the opml file on my C drive on my windows machine if that helps. You can copy the file to your Joggler using WinSCP. That's how I did it before roobarb posted his method. Thanks for the tip. It has taken me a couple of days to get up to speed w...